• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Spartan GL's Build Thread: (09-21-14) New photos!

Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Joe..kinda sounds like you have a vacuum leak.
 


Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

And if it's still on the stock MAF tables/TB...everything.

And you're trying to run it on an LQ4/N* setup...that could very well be why.

Also, if you just shoved the MAF into the TB and expected it to seal and run, that could be another issue there...hopefully it is sealed with a coupler.
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

the MAF has a coupler on it now. i had to wait for one to arrive in the mail.

Also ordered a new MAP sensor to see if that hammers it out and Yes its still on the stock tables

PCM is getting Dyno Tuned tomorrow!
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Joe send you to pms about those calipers please respond
 


Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Alright, changed a MAP Sensor and a PCV. Finally getting around to putting the hoses on the FMHE and Intercooler.
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Once that is done i will be taking it to get tuned. Any recommendations on the Fluid for the Intercooler? What's a good mix for coolant/water?
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

DanPrixGTP said:
This build just needs to be finished already.
Click to expand...

Build is complete, I am just crazy ****ing busy with Finals and ****. Tonight a hour or so before sunset im going to finish the intercooler piping and plan on bringing it to S&R performance first thing in the morning
 


Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Intercooler piping is complete! It will be getting towed to get Dyno tuned all ****ing day tomorrow!
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Cell died I lost all my contacts PM me you number I will call from my land line or I am going to the att store today they may be able to fix it and pull them off if they can I will call you between now and saturday
Spartan GL said:
I will make it my mission to attend. just under a month to prepare i think this is doable.



Give me a call Logan.
Click to expand...
 
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.

Just got all my contacts off my cell due I will call you from my land line to my work schedule and dad being in the hospital it will have to wait until tues or weds
 


Re: Spartan GL's Build Thread: (09-12-2012) PG 51 Ready to get Dyno tuned!

matt5112 said:
It today over yet?
Click to expand...

The GTP is at S&R Performance, i dropped it off Thursday Morning.

Just got back from a 3 day field exercise and range with the Army. I dont think that shop works weekends so i assume i will get a call in the morning regarding it.
 
You must log in or register to reply here.
Back
Top