BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
o-ring.. can cause the issue.
o-ring.. can cause the issue.
Spartan GL's Build Thread: (09-21-14) New photos!
- Thread starter Spartan GL
- Start date
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Honey Badger gives no ****s.
I bought a new Wizaired CAI from ZZP. this one is fitted with the correct tubing for the Northstar with the right length.
the old was was a GEN 1, and beat to **** because i got it used.
Honey Badger gives no ****s.
I bought a new Wizaired CAI from ZZP. this one is fitted with the correct tubing for the Northstar with the right length.
the old was was a GEN 1, and beat to **** because i got it used.
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Still waiting on that intake from ZZP,
While im waiting as far as the inter cooler tubing goes this is my understanding of it.
Bottom of the left side of the FMHE to 90* bend to top of I/C pump (Bottom line from I/C pump goes to LEFT OR RIGHT port on the intercooler?) and the oposite will be the return line. and the port on the Top of the FMHE goes to the tube you pour in?
Still waiting on that intake from ZZP,
While im waiting as far as the inter cooler tubing goes this is my understanding of it.
Bottom of the left side of the FMHE to 90* bend to top of I/C pump (Bottom line from I/C pump goes to LEFT OR RIGHT port on the intercooler?) and the oposite will be the return line. and the port on the Top of the FMHE goes to the tube you pour in?
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Intake from ZZP arrived, going to throw that in the car later on today.
Intake from ZZP arrived, going to throw that in the car later on today.
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Alright the new wizaired is installed. Jesus ****ing christ ZZP needs to get better fitmit on that thing,
Ran out of daylight to get finalized pictures. but here are some during install
Alright the new wizaired is installed. Jesus ****ing christ ZZP needs to get better fitmit on that thing,
Ran out of daylight to get finalized pictures. but here are some during install
BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Quaility was clearly job 1. Or they expect you have a slightly different setup? maybe they expect the maf inside the box?
On intercooler routing. Lowest point on your FMHE is what feeds into your pump that should be located at the same height or lower than that exit from the FMHE. Something to consider is that you won't have a lot of fluid in the system the way you describe it. Many have found the running hose through the bump tubes gives you about an extra gallon or two. Pickup a hose that is larger and fits over your IC hose to slip over and use as a buffer to any sharp edges etc.
Keep in mind on the pics, this is not your routing, this is Bonnie. Giving you the sharp edge info though
I then thought about movement over time and put a zip ties on the smaller hose right where I wanted the larger to stay put. This worked well and didn't restrict the smaller hose at all.
Quaility was clearly job 1. Or they expect you have a slightly different setup? maybe they expect the maf inside the box?
On intercooler routing. Lowest point on your FMHE is what feeds into your pump that should be located at the same height or lower than that exit from the FMHE. Something to consider is that you won't have a lot of fluid in the system the way you describe it. Many have found the running hose through the bump tubes gives you about an extra gallon or two. Pickup a hose that is larger and fits over your IC hose to slip over and use as a buffer to any sharp edges etc.
Keep in mind on the pics, this is not your routing, this is Bonnie. Giving you the sharp edge info though
I then thought about movement over time and put a zip ties on the smaller hose right where I wanted the larger to stay put. This worked well and didn't restrict the smaller hose at all.
BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Sheffer..I believe he was "test fitting"
Sheffer..I believe he was "test fitting"
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Yeah it was a test fit, Whats the proper way that is recommended for the MAF?
Yeah it was a test fit, Whats the proper way that is recommended for the MAF?
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
that might of been what was causing my stalling issue when the RPM's drop below 1000
that might of been what was causing my stalling issue when the RPM's drop below 1000
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
It needs a tune, and also needs to figure out why its stalling now that the transmission leak is fixed
It needs a tune, and also needs to figure out why its stalling now that the transmission leak is fixed
Doug 97 gtp
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
could you take a picture of your overflow tank for your collant and where it is located i had to ditch mine when i did my intake and im looking to get another one again.
could you take a picture of your overflow tank for your collant and where it is located i had to ditch mine when i did my intake and im looking to get another one again.
BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Doug..there was just a post or two on this in the last day. Give the search bar a whirl.
Doug..there was just a post or two on this in the last day. Give the search bar a whirl.
slajoie
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
I belive the fix for the guy BillBoost is talking about was a fuse. Also the guy said one of his ground wires was touching his hood when he shut it couseing it to ground out. The guy's post is in "BoostenGTP's Ride".
I belive the fix for the guy BillBoost is talking about was a fuse. Also the guy said one of his ground wires was touching his hood when he shut it couseing it to ground out. The guy's post is in "BoostenGTP's Ride".
BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Grounding to ground.. how's that cause any issue?
Grounding to ground.. how's that cause any issue?
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
Anyone know why it would be stalling if not kept above 1000 rpms? wasnt doing that before i got the leak fixed..
Anyone know why it would be stalling if not kept above 1000 rpms? wasnt doing that before i got the leak fixed..
BillBoost37
New member
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
What is the IAC count look like? Is it not idling or stalling in gear?
What is the IAC count look like? Is it not idling or stalling in gear?
Spartan GL
Specialist Walter US Army
Re: Spartan GL's Build Thread: (7-17-2012) PG 46 Build Complete Needs a Tune now.
not idling, unless you give it gas and keep the RPM's over 1000.
The car still has not been tuned yet. i just finished doing the RNC security
not idling, unless you give it gas and keep the RPM's over 1000.
The car still has not been tuned yet. i just finished doing the RNC security