• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gtx has a turbo!! lol

Re: 98 gtx and 97gtp to make one

Can I just use a rubber fuel line? Like from az and make it work to the metal connector or would they have that line I need?
 


Re: 98 gtx and 97gtp to make one

Fixed the gas line problem and changed the tps still getting this code p0122 what could be the problem?
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

check the wires to the tps. any cracks or bare wire will make the same code pop up. the wires get whats known as dry wire, the copper turns dull and no longer sends signal right.

take the plug off, and bend it back to see the ends were the wire goes into the plastic.
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

check the wires to the tps. any cracks or bare wire will make the same code pop up. the wires get whats known as dry wire, the copper turns dull and no longer sends signal right.

take the plug off, and bend it back to see the ends were the wire goes into the plastic.
I had this problem before with this code it was something dumb but I.changed the pig tail to it could I have put the tps in wrong?
 


Re: 98 gtx and 97gtp to make one (p0122 code help)

I had a wiring problem and my dads friends shop did it for me they used the proper techniques
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

Didn't get to look at it today but will tomorrow hopefully can call the guy who fixed that problem before and ask him what to do
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

100MEDIA_IMAG0449_zpsec67fcea.jpg

Getting this in the mail soon paid 45 plus shipping it needs a harness got told I can get one through the company its a older one but should work got told it was a fw vr 1.3 interceptor good price or no and would any one have a spare harness?
100MEDIA_IMAG0454_zps2cf4466c.jpg
 


Re: 98 gtx and 97gtp to make one (p0122 code help)

should be getting in a intesne pcm in a few days here called the guy who fixed it and it was the pcm we changed it from the other 97 i had so i went and just got this one going to see if it will start with putting in the intesne new one in wish me luck also going to look at grounds tomorrow, where are they at if anyone has a picture that can point them out i can look for that, and look again for rub or damage to wires
custom-pcm-stock-image_zpsb5b0da14.jpg
 
Last edited:
Re: 98 gtx and 97gtp to make one (p0122 code help)

What's the proper technique for fixing a pigtail? I've seen a lot of mechanics use a crimp connector. IMO that's about the most improper technique out there...may as well twist them together and hope for the best if that's the way it's done.
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

What's the proper technique for fixing a pigtail? I've seen a lot of mechanics use a crimp connector. IMO that's about the most improper technique out there...may as well twist them together and hope for the best if that's the way it's done.
lol thats what they told me when i took it to them, but they use solder and a rubber shrink thing but i was jw bill if you know where i can find a wiring harness for the gauge i know its a old one
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

Going to pick some flaps for 15 I'm tired of the nasty the flings up at my car lol
Screenshot_2013-04-02-13-48-09-1_zps8ec074cf.jpg

Personally I like how they look on the car
 


Re: 98 gtx and 97gtp to make one (p0122 code help)

3E53L33N35L85Ge5Mad3na62aee04b50d18ea_zps658ce58c.jpg

imagejpeg_2_2_zps7803215b.jpg

Picking this up tonight's I hope do you think its a good deal for the roof rails I have spares and the spoiler aswell the push rods are from summit
Do you think I should trade? It's a 3h drive there lol
 
Back
Top