• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gtx has a turbo!! lol

Re: 98 gtx and 97gtp to make one (p0122 code help)

Do it. I'll trade you for an s1x if you'd rather have that
 


Re: 98 gtx and 97gtp to make one (p0122 code help)

On my way now to get it it should be a fun project this summer
 


Re: 98 gtx and 97gtp to make one (p0122 code help)

It's a awesome cam :) I was j/k though. I wouldn't go through the trouble again of pulling my cam out of the wheel wells.
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

Ok nice yeah I hope I can trade some parts for the ported heads I'm looking at also then ill have a fun project and a fun car :)
 
Re: 98 gtx and 97gtp to make one (p0122 code help)

IMAG0658_zps6d4dbaf5.jpg
On my way home with my new cam found out the guy I got it off knows the guy how owns the 8sec gtp they run on the track together there buddies thought that was cool
 


Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

Got this in the mail today:) going to try and start my car up :)
IMAG0660_zps8036d252.jpg
 
Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

IMAG0662_zps76e528af.jpg

Got the p0122 code to clear with this sucker but still shutting off could it be the fuel filter bad?
 
Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

is it running for 10 seconds and then stalling? if so you may nee done of them case learns with the new pcm. try putting the stock one back in see if it stays running.
 


Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

Scottydoggs said:
is it running for 10 seconds and then stalling? if so you may nee done of them case learns with the new pcm. try putting the stock one back in see if it stays running.
Click to expand...
Yeah the 97 I have to pull out the little thing and then pthe stock one back in I guess I got a fuel filter I think I saw a little bit of gas sitting under my car not sure if its from when I had that leak going to look at it tomorrow when I can actually see things lol
 
Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

Try unplugging the maf sensor and see if it stays running or the fp relay bypass thingie.
 
Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

dsmuts said:
Try unplugging the maf sensor and see if it stays running or the fp relay bypass thingie.
Click to expand...

Yeah going to try the knock module swap over see if that will work but yeah could my alternator be bad or something?
 
Re: 98 gtx and 97gtp to make one going to nic cam and comp push rods this summer:)

Well if its starting back up after it dies no
 
You must log in or register to reply here.
Back
Top