• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

February meet at CapnBreakAlot's



I'm shooting for April is my guess. Have a good size house and garage and plenty of street parking...and will have all of my tools down here and air compressor.
 
You guys should consider coming to the W-Body/3800 meet this year if you didn't come last year...

Sent from my Galaxy Note 3
 






Depending on prices of what I'm able to get a few thing for....Goal prices is under $250

Deal would be:
1.9 Harland Sharp Roller Rockers (Used, rebuilt, refurbished, and with revised pedistals)
L76/L92 Valve Spring (90# Spring is right in between LS6 and 105# spring, a happy medium)
LS Style Valve Spring Retainers
Re-Usable Rocker Arm Bolts

....Basically a kit to do 1.9's all at once.

Rockers will be coming directly from Harland Sharp.....These rockers cause a bad rap in 2000ish. There is a whole lot to the story but long story short is that one of the CNC machines that made the pedistals for the rockers was out of tolerance. Harland Sharp corrected the issue and produced a revised pedistal to correct the problem. Intense rushed the product to the market without enough testing to see the error right off the bat and then had a lot of returns and refused refunds, which cause a lot of bad stuff to be said about these rockers. I personally have run the 1.9's after the revision for over 50k and looked exactly the same as the day I put them in. Look at Harland Sharp's reputation in every other platform and also know that they carry a lifetime warranty.
 
You must log in or register to reply here.
Back
Top