So I cleaned the top side of the motor after work today and was just as impressed with the results as I was on the underside yesterday.
Befores:
Afters:
All went well. I let it cool off for about an hour before I went at it.
Covered the alternator and air filter with sacks and started spraying.
Let it sit and rinsed. Did that about 3-4 times.
I used a shop vac to suck up some of the excess water.
Then went to go start it, and it wouldn't start. So naturally I start freaking out thinking I did something wrong.
Get out, look at the bay and realize I took the bag off the alternator but not the air filter, duh!
Started right up after that. Left it run for about 15 minutes while I cleaned everything up.
Also, I was trying to check the power steering fluid because I think it's low from the noise I'm hearing.
Besides being very difficult to get to, how in the hell do you get the cap off?
I could only turn it maybe 1/4 of a turn to the left and it'd stop. I tried lifting up on it and everything and couldn't get it to budge.
Any tips or tricks?