• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1997 Black GTP - Soon To Be Thumping.

Status
Not open for further replies.
Re: 1997 Black GTP, Yet Another Update.

Matt Palm said:
have you thought about putting mesh in the sd lip by the "vents".
Click to expand...

Yes I have. Many times actually.

I'm just too lazy to make such small grilles.

slick2500 said:
Does it look like this?
Click to expand...

Yes, it looks exactly like that.

akarana23 said:
Dan, your car is sexy. End of story.
Click to expand...

Why thank you my sir. Means a lot.

We are about to rollin' around in the D on Saturday with two best GP's around.

Schmidty said:
those halos...... :th_thumbsup-wink:
Click to expand...

Thank you Mah man.

Looks like people are actually liking my projectors. I was expecting a lot of hateraid.
 


Re: 1997 Black GTP, Yet Another Update.

You n anmar going to Detroit? Going for a photoshoot or what? Holler at me on here or FB if you are n I'm down to roll. Cars looking good tho bro, ssc springs n it'd be that much better :th_thumb-up:
 
Re: 1997 Black GTP, Yet Another Update.

GrandPrix06GT said:
You n anmar going to Detroit? Going for a photoshoot or what? Holler at me on here or FB if you are n I'm down to roll. Cars looking good tho bro, ssc springs n it'd be that much better :th_thumb-up:
Click to expand...

I'm driving out to his house and he is helping me with a few things, but the main reason I am going out there is to get re-tuned. We both are, by the same person.
 
Re: 1997 Black GTP, Yet Another Update.

Nice man, good to hear..post up something if you decide to hang out down here. West bloomfield is like 30-40 mins from me n woodward is 20 mins.
 




Re: 1997 Black GTP, Yet Another Update.

slick2500 said:
Does it look like this?
DSCF0005.jpg
Click to expand...
DanPrixGTP said:
Yes, it looks exactly like that.
Click to expand...

http://www.grandprixforums.net/slp-spoiler-help-26317.html

Common Problem with them ^^^

One of things I have worried about with getting one myself. I have read a couple times that leaving it on the car in the heat with the bolts torqued down will pull it down into place, but that may not work all the time. :th_shrugshoulders:
 
Re: 1997 Black GTP, Yet Another Update.

Thanks Chef.

I put some garden hose washers on the back three mounting points to raise the back up just a tad.

The gap is so small you can't even see it unless you really try, but water does flow through. A little more/less in some places along the back.
 
Re: 1997 Black GTP, Yet Another Update.

Them Halo's







MAN FEET:




Having quite the difficult time aiming these projectors. They are aimed all the way, and the cut off barely reachs more than 20 feet in front the road. I don't get it. Everytime I try to use the aiming the screws, nothing happens. Me so confuzzled.

Oh, and I forgot to show you all my RaceKer switch to add to my Nasa cockpit. This switch is for the Halo's.

I was too lazy to measure it, so the switch was directly in the center. It's just a Grand Prix, I give no cares.





Damn car also has two codes. P0171 and P0172. My LTFT's are sticking at 16.4 at idle, so I can almost promise these codes are for a Vacuum leak somewhere. Both codes are related to System Bank 1 Lean. I've sprayed the whole damn engine with carb cleaner and I can't find a thing. I do have a new Denso Upstream o2, so that is not the problem.

My guess, either a Vac leak I cannot find cause I am dumb, or an injector is going bad maybe? Who knows.

Stayed tuned though, I'll have another update for you all on Saturday night.
 


Re: 1997 Black GTP, Yet Another Update.

for your light i noticed that they dont mount flush with with body and that "could" make all the diff in the world.
 
Status
Not open for further replies.
Back
Top