• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.
got these in the mail as well

AmberChromebulbs.jpg
 


hopefully install them tomorrow with the new decal

And bought something else big - kindy for the car but not.

Will post pic once i have.
 


Get to put my car on the lift today at work, either have a good exhaust leak that broke loose when I got on it this morning or something else happened. Either way its got a nice rasp under load and is alot louder than normal. Might be ordering headers soon depending on what the problem is. :th_scratchhead:
 
Nearly done doing a complete tuneup which has turned into an all day project.The holdup?the 3 rear spark plug wires.They are difficult to get ahold of and not enough room to work.fml
 
if you slide the socket on the plug first, you then with a ratchet and a 3 inch extension, the extension will just catch the socket,( while resting on the o2 sensor) or use a swivel extension.
 
dmahlikGT said:
Nearly done doing a complete tuneup which has turned into an all day project.The holdup?the 3 rear spark plug wires.They are difficult to get ahold of and not enough room to work.fml
Click to expand...

scottydoggs said:
if you slide the socket on the plug first, you then with a ratchet and a 3 inch extension, the extension will just catch the socket,( while resting on the o2 sensor) or use a swivel extension.
Click to expand...

How does a socket help with getting the wires off???

I just grab at the base (make sure engine is COLD) and twist a couple times and they usually pop off easier... but then again sometimes they just fall apart and I go to Oreillys and get a whole new set, yay lifetime replacements!
 


i misread i guess lol twist and rip that crap off. skimming posts = bad me.

i like to wear leather gloves for this job. better grip and no fear of getting cut up when it pops off.

pulling the dog bones and pulling the engine forward does help with the room issue.
 
I attempted pulling the engine forward but my ratchet strap isnt functioning right.I have full access to #6 wire,got it loose but still not off yet. #2 will probably be the most difficult.Im hatin this,always at the very end theres a snag these boots are on very tight,damn.Ill keep trying.
 


008-3.jpg

took about 2 hours cuz of no directions what so ever and had about 10 extra plugs on the back for some reason
 
Status
Not open for further replies.
Back
Top