• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.
saved about 19 dollars on gas by using the points on my stop and shop card, got 16 gallons, reg price wouldve been 63 dollars, brought it down to 45 using the points
 


Compg4me said:
Changed her oil and gave her a good cleaning inside and out. I was thinking how good she looked until my grandfather pulled up in his new vette. Needless to say she didn't look as good sitting next to over 600 horses.
Click to expand...

Your grandpa has a zr1?
 
Did my tailgater switch. Got all the wiring done and was finishing it by soldering the last thing under the center console. Got that done, flipped it over.... where the **** is my switch?? The top of it came off. ****ing worthless chinese piece of ****ing ****. SO I had to take out all the now useless wiring which I had actually hidden really well... so I got pretty mad and I was throwing **** around while putting it all back together and apparently that did in my keyless entry remote which was barely attached on the inside. So now I have to solder that which is how I broke the other one (which funny enough didn't need it as bad as this one). I decided I'm not spending a ****ing penny on my car again unless it's for maintenance that I HAVE to do.

tumblr_lqcrgx34AQ1qhq1pjo1_250.gif


ALSO, my locks have randomly not been working. Sometimes they'll be fine and other times when its supposed to lock it'll just click in the bcm. Unlocking works fine. So probably new driver side switch or new bcm. It's not getting either.
 
Cleaned out the inside, gonna put new tie rods and new sway bar on tomorrow and wash the outside and vacuum the inside.
Looked into ordering new lug nuts but cant find some that are nice/look good/safe and dont cost a hundred bucks, 50-70 im fine with but not 100
oh and one of my wheels are peeling, saw the air bubbles when i sprayed them but ran out of time to pill it off and start over. Gonna try and fix it and the other wheel that has bubbles in it this weekend
 
Seriously. If I make a post that says I did something that costs money to my car that I didn't really need to do, ban me.

>.>
 


i saved gas today by not driving it anywhere. or doing a thing to it, ya know what, i haven't even seen it today lol hope its still out there ....
 
Drove to work and passed about 10000 tractors. Then I got home and got the bike out and picked my son up from my mom and dads because it's in the 80's today on the last day of winter.
 


i broke down and pulled the lower kick panels off under the dash and the glove box out and turned my blend door to cold, put it all back together, then popped the relay back in for the a/c compressor, and BAM! ice cold a/c. then vac'ed it out and did a full interior cleaning, days off are a b1tch.
 


Swapped the top of the fuel pump canister over from the returnless to the return style lid, soldered new wires on to the connectors for my 255lph pump so I didn't have a crimp fitting in there and I know they're solid now. Just have to wait until my fuel hose get's here so I can connect the pump outlet to the top of the canister lid, and I can put the pump back in the tank. Turns out the return line is a different diameter on the return style system than it is on the returnless so I will have to make a trip to picknpull to get a nylon return line from an older car.
 
Status
Not open for further replies.
Back
Top