• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.


Bills1997GTP said:
Is there a write up on how to do this? Splitting up the lines sounds like a nice size job lol


Sent from my iPhone
Click to expand...

You can probably get away with using the stock lines as they are barbed for the quick disconnect then use the adapter it comes with to put in the spot for the rad. Hose clamps and it should work good.

Sent from the Milky Way
 
did nothing to my car today because it is over 1000 miles away from me sitting in my garage, instead used my dodge mini van to haul the family on a summer road trip to the inlaws
 
Russosaur said:
You can probably get away with using the stock lines as they are barbed for the quick disconnect then use the adapter it comes with to put in the spot for the rad. Hose clamps and it should work good.

Sent from the Milky Way
Click to expand...

Ok and where's a good place to put the cooler so it gets good flow?


Sent from my iPhone
 
I would say lower part of the rad or in front of the grills for the best airflow. But others with coolers should chime in.

Sent from the Milky Way
 
Right at the bottom of the condenser. And cutting lines and putting hoses on is no big job, you should put a flare on them to act as a barb though.
 


02NavyBlue said:
Right at the bottom of the condenser. And cutting lines and putting hoses on is no big job, you should put a flare on them to act as a barb though.
Click to expand...

Thats why I implied to use the stock line ends which are flared. Now I don't know how tight the hose is on them but thats how I seen a few guys so it on the interwebs.

Sent from the Milky Way
 
$10 at a JY, got it off of an Exploder. Transmission temp rarely gets about 175*F, IMO it's best to leave the radiator cooler connected because in the colder months it acts as a fluid heater as well.
p1050116.jpg
 
Got my passenger side completed, well almost. I have to wire another ground for the puddle lights to work right, they stay on dim after the car is off with a body ground.

DSC06057Custom.jpg

DSC06061Custom.jpg

DSC06065Custom.jpg

DSC06067Custom.jpg


And I lit the door panel light, which isn't lit from the factory on my GP (for those that have older ones and didn't know) Those are LED's in there.
 
02NavyBlue said:
Got my passenger side completed, well almost. I have to wire another ground for the puddle lights to work right, they stay on dim after the car is off with a body ground.

DSC06057Custom.jpg

DSC06061Custom.jpg

DSC06065Custom.jpg

DSC06067Custom.jpg


And I lit the door panel light, which isn't lit from the factory on my GP (for those that have older ones and didn't know) Those are LED's in there.
Click to expand...
Mirrors look sick! Do they come on when you unlock the car from the key fob?

Sent from my SM-N900P using Tapatalk
 




Status
Not open for further replies.
Back
Top