• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

The Official what you need and how-to for CTS-V brakes



Would love to see the pictures, I'm on my pc but cannot see any pictures that are being referenced - anyone know why? Thanks
 
Hello all GXP and Grand Prix owners. I have a 06 Impala SS that I am going to do this brake upgrade for. I know what your asking....."why am i here" its simple i can't find any impala forums that has done this. Before I buy the parts I have a few questions. In the link are CTS-V brake calipers and I only want to confirm that they are the right ones that I will be putting on:

http://www.amazon.com/ACDelco-172-2...1277&sr=8-1&keywords=ACDelco+caliper+assembly
http://www.amazon.com/ACDelco-172-2...1277&sr=8-4&keywords=ACDelco+caliper+assembly

Also I would really like it if someone can find and post a link for the brake lines needed for the job. I have called around and no seems to knoew what im talking about.
 
StormFox87 said:
Hello all GXP and Grand Prix owners. I have a 06 Impala SS that I am going to do this brake upgrade for. I know what your asking....."why am i here" its simple i can't find any impala forums that has done this. Before I buy the parts I have a few questions. In the link are CTS-V brake calipers and I only want to confirm that they are the right ones that I will be putting on:

http://www.amazon.com/ACDelco-172-2...1277&sr=8-1&keywords=ACDelco+caliper+assembly
http://www.amazon.com/ACDelco-172-2...1277&sr=8-4&keywords=ACDelco+caliper+assembly

Also I would really like it if someone can find and post a link for the brake lines needed for the job. I have called around and no seems to knoew what im talking about.
Click to expand...
I believe them are for the rears..for the fronts you need these."ACDelco 172-2287 Caliper Assembly"
"ACDelco 172-2288 Caliper Assembly"
land you might as well add the pins and brackets in there too to hold the brake pads in.
 


thanks so very much. i have located everything i need to do this project i will post pics and keep you up to date on my impala. its should be no problem
 
Yep 06gt about summed it all up.. let us know if you need any help along the way and don't forger to post some pics of those sexy things!! :th_thumbsup-wink:
 


It's all in this thread, just read thru it and gather numbers..

here's for the sleeves: Part# 6679K16 Desc: Metric Steel-Backed PTFE-Coated Brnz Bearing for 12 mm Shaft Diameter, 15 mm Length Price: $2.45/each Qty: 4 (Grand Prix's have 14mm bolts and CTS-V's use 12mm Bolts)

For banjo bolts, I went to advanced n got em for 10 bucks a piece, the only thing i had to do tho was double up copper washers which probably isn't too good, but I haven't had problems yet. And that's because the threading stopped and it was still loose and the bolt would spin. So I added an extra copper washer on each side to prevent that and tightened em up.

And then for the caliper colts just google cts v caliper bolts or g8 GT work too I believe. N I ordered 4 of them off of some dealer site.

as far as bushings, I didn't run any. I couldn't find em n tried w.o them and no problems...yet lol
 
You need the cts-v bolts bc they are longer.. also you dont have to run the sleeves like 06gt said but they help keep the new bolts centered which helps the caliper from moving around. If you dont run them make sure your calipers are extremely tight to the knuckles.
 
Quick question......Did anyone experience any abs light coming on or have any issues with the entire brake system no matter how big or small after the upgrade was finished?
 


You must log in or register to reply here.
Back
Top