• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Some more top swap questions! Yay!

Follow the sticker all gm rocker bolts are tq then the 90° even the stock ones it says it right in the Haynes manual I don't know where 25ft lbs came from.

Sent from my SM-G920V using Tapatalk
 


Ok so i was putting my rear header in and went to connect the o2 extension and they sent me the wrong one. So can i just get some wire, cut and solder the old harness?

Sent from my LG-D851 using Tapatalk
 
you can cut the plug off the cars harness and make it longer from that side. you cant cut the o2 sensor wires. one is ss.

make sure you beat the fire wall for the o2. or you'll be sorry later on.
 
Thanks for the info scotty! Does anyone know which wires you splice for new map plug

Sent from my LG-D851 using Tapatalk
 


you should have taken that off first, while it ran still. could have done the redneck method.

now you'll need vice grips on the flex a breaker bar and a pipe.
 


the round thing with teeth on it for the starter. flex plate.

take the plastic cover off the bottom, a few 10mm bolts, then take the starter off, then vice grip the fat part of the flex near the teeth really tight.
 
Lmao good luck with that whatever you do don't ruin the flex plate best to try and get a impact

Sent from my SM-G920V using Tapatalk
 


I've never heard of a auto parts store renting one? You can buy a cheaper one if you have a air compressor do you have a harbor freight?

Sent from my SM-G920V using Tapatalk
 
Ya i have a harbour freight but my dad has an impact but he didnt think his would get it off because its one of the cheaper ones

Sent from my LG-D851 using Tapatalk
 
You must log in or register to reply here.
Back
Top