• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Some more top swap questions! Yay!



Ok ill check the rental in the morning or just see if my dad can bring his over tomorow. Now the map sensor wires are they excactly the same for the l67 map sensor

Sent from my LG-D851 using Tapatalk
 
if they are the same colors match em up. if not the same colors one wire might have a line on it, match the two with lines together.

just twist and tape the wires till you know its working right, aka not setting a code. if all goes well solder them in.
 




What goes in between the coil pack bracket and the tensioner is there a bolt or what. I cant get the tensioner to sit right

Sent from my LG-D851 using Tapatalk
 
the long stud goes through the large hole on the coil bracket, then line up the bolt holes.

zoom in on this pic,

002_zps7izvpwp6.jpg


on the inside of the bracket is a 1/2 circle, the icm harness goes in there, watch you dont pinch the harness when bolting it down.
 
Ya but does anything go on the stud right after the coil bracket and before the tensioner. I put bracket on then very next thing was the tensioner and it just kind of sits funny

Sent from my LG-D851 using Tapatalk
 
Nothing goes on in between the braket and tensioner there's a little nipple on the back side of the tension that sides face you on top of the braket so it doesn't spin you probably just have to rotate it a litlle

Sent from my SM-G920V using Tapatalk
 


You must log in or register to reply here.
Back
Top