• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Some more top swap questions! Yay!

till they look smooth. your only doing light pressure, its not like you can grind em to nothing, unless the pitting is that deep.

even the valve seats were pitted up some.

before.

001_zpsdlvzryom.jpg



after

005_zpsa0mlha77.jpg
 


I paid 150 bucks for a shop to do my heads I have on now to get a valve job like that, and you did it yourself. good job.
 


Hey quick question im about to buy my sd headers is there any difference in the ones they have on ebay and the ones on their website?

Sent from my LG-D851 using Tapatalk
 
Also im buying all my bolts and gaskets right now do i need a new crankbolt? I didnt think so but noticed zzp had it in there top swap gasket kit

Sent from my LG-D851 using Tapatalk
 


Ok so im getting my heads put back together minus the 1.9 rockers im still trying to find. I got felpro valve seals and im confused if im supposed to take the metal rings off to install them or just force it on?

Sent from my LG-D851 using Tapatalk
 
yup, just push em on. if you got felpros mine came with a plastic condom to cover the locks so the seal slides past them smoothly and dont tear the seal up.

you can also use like a 10 mm deep socket to push them all the way down.
 


You must log in or register to reply here.
Back
Top