Safe to drop pulley size?

[Tuner-Extraordinaire]

With just headers on my other wise stock car I dropped 4 seconds off my 0-100 times

That would imply that a stock car pulls 18 second 1/4 miles.

 

[blakgtp]

maybe his car was knocking on the stock pulley and the headers got rid of knock?:th_scratchhead:

 

[dsmuts]

I'm thinking my cat might have been partially clogged. I have videos of it if you want to see them.

 

[Doogie]

How much would I have to spend and what would I have to get for my engine to support a 3.4 pulley?or even dropping to a lower sc pulley? I have a 2001 3.8 GTP two door 140k but has newly rebuilt engine except still has same crank shaft.""

 

[Tuner-Extraordinaire]

headers, intake, valvetrain mods (cam or rockers.)

 

[matt5112]

How many miles on it? If less than 1000 wait and see if it fails again.

Also stop hijacking threads.

 

[wa04compg]

My car knocked up to 5 degrees competely stock...after tune intake and DP most I got was .5...now with headers I have 0 KR WOT throughout gears...just get headers the drop Pulleys according to your knock

 

[ctracer]

before you go and drop pulleys, sometimes the better thing to do is get a real good tune on your current pulley. a really well tuned 3.8 pulley will probably outrun a crappily tuned 3.6 pulley and so on.

 

[Tuner-Extraordinaire]

before you go and drop pulleys, sometimes the better thing to do is get a real good tune on your current pulley. a really well tuned 3.8 pulley will probably outrun a crappily tuned 3.6 pulley and so on.

^^^^ This. ^^^^

(Even though you don't even have a L67.)

 

[Toms04compg]

When you scan that will help getting an idea on " how safe " it is. Then take that number and decide if you feel safe still running it.