• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Red 2006 Grand Prix GT Supercharged



Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Got my end links from ups just now. Gonna throw them on!
20130325_165010_zps5b05251d.jpg

20130325_165131_zpsf85cb620.jpg
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Yippee!!
you have to cut every joint?
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Lol trying to now! Cut the first one n the damn thing wont come off still. All thats on is the back bolt n a part of the front. Gonna try n use a punch to getnit out. If not im gonna wait till tomorrow cuz its fricken colddd. I thought id finally have an easy job! :thumbdown:
 


Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

This is my dilemma
20130325_175657_zpsc2bb50b9.jpg

20130325_175621_zps3918ae9f.jpg

20130325_175600_zps82893440.jpg

Air tools wont get the bolt to even spin after pb blaster. Punch wont get it out, just bounces with sway bar lol. Fml I think just the rears will be like this but who knows.
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Damn and a bunch of other bad words.
The nut is on the inside right...you try tightening first then loose. torch
I'm confused cuz you said there was no nut on the inside to hold but where it is cut looks 6 point
You would think with a breaker bar/3lb mall you could get it to budge
OK I'm clueless
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

spazzz said:
Damn and a bunch of other bad words.
The nut is on the inside right...you try tightening first then loose. torch
I'm confused cuz you said there was no nut on the inside to hold but where it is cut looks 6 point
You would think with a breaker bar/3lb mall you could get it to budge
OK I'm clueless
Click to expand...
Haha ik right. On the rear end links with the top nuts where it's bolted to the strut, I found the inside bolts and they just got stripped quick so I just cut them to avoid hassle. Now these are the ones attached to the sway bar and these won't move at all. So I cut it thinking it'd just pop off and that's the aftermath there. Ill try the breaker bar with a hammer tomorrow. I tried a socket and a power wrench n it wasn't budging. Jammed my fingernail trying because it whipped back the other way right between the tie rod n the wrench! N I'm over it now just gotta wait for it to be warm. I'm hoping the fronts won't be as bad because I could at least get the bolts attached to the sway bar to spin last time because I tried taking the whole end link off last time when it snapped but I just left it. So I'm hoping just the rears are the pain!
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Yeah I need a better grinder with a good cut off wheel. Idk if the neighbor has one. He lets me use all his tools. I have one at work with a little 4 inch wheel but ill check tomorrow.
 




Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

So I'm to lazy to read what you've tried so far but have u tried getting a thick flathead and a big ass hammer and hitting it? Or use a grinder or worse case scenario use this as a excuse to upgrade your sway bar
 
Re: Red 2006 Grand Prix GT Supercharged (Lowered, Rims & Aeroforce)

Lol just tried a punch really n a cut off wheel. I'm gonna try drilling them tomorrow. Ill figure it out, I didn't have the patience today to be messing with it. I thought it'd be smooth sailing but I should know by now!
 
You must log in or register to reply here.
Back
Top