• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Now with less white and more function.

Re: Now with moar things to install.

Got the IC all on and junk. Running well, though it needs a tune. LTFTs are off.

SD lip is off for the moment. Dont worry, it will be back on.
IMG_20140108_160335_948_zps6bc2c270.jpg


IMG_20140108_160208_313_zps67df874b.jpg
 


Re: Now with moar things to install.

This boy ain't playin! Haha good stuff man, it's come along way quick! Love it n looking forward to the write up.
 
Re: Now with moar things to install.

Coil pack relocation

Ground down that little stud
IMG_20140104_133746_241_zps34a133f8.jpg


Plate mounted
IMG_20140106_200137_941_zpsfd3ac36a.jpg


coil packs on
IMG_20140106_200723_042_zps46cd3035.jpg


making sure the plug wires would reach
IMG_20140106_201640_241_zps1b5bcb2e.jpg


Time to get srs
IMG_20140106_203208_476_zps4d7b9f63.jpg


IMG_20140106_203223_405_zpsef98c40e.jpg
 


Re: Now with moar things to install.

Solder **** together.
IMG_20140106_214245_367_zpsd81c9158.jpg


solder more **** together. This time try to get the wires correct
IMG_20140106_222332_578_zps686e3d9d.jpg


IMG_20140106_230151_616_zps9ba94b69.jpg


wrap it up
IMG_20140106_231332_075_zpsfd5ad11d.jpg


check to see if it all fits
IMG_20140106_232423_751_zpsf5e3e19b.jpg
 
Re: Now with moar things to install.

IMG_20140106_232507_337_zpsd914a6eb.jpg


IMG_20140106_232516_137_zps8fb3f58c.jpg



Time to install ****.
IMG_20140107_240521_609_zpsbf05af16.jpg


IMG_20140107_240657_638_zpseea3d429.jpg


IMG_20140107_241236_096_zps75d84733.jpg


Remember to torque everything to their correct value, and in proper order.
IMG_20140107_242239_577_zps503ba0cb.jpg


Once everything is torqued, make sure the blower spins freely.

Yay new intake
IMG_20140107_014926_846_zps37053ed9.jpg
 
Re: Now with moar things to install.

Less bumper
IMG_20140107_154958_698_zpsadd9438c.jpg


Less bumper accessory things
IMG_20140107_161757_485_zpsef217b76.jpg


Cut this thingy
IMG_20140107_163048_809_zps1dea7c1b.jpg


Mount that thing
IMG_20140107_170458_256_zpsda5dadf0.jpg


IMG_20140107_170518_893_zps55c6e0a1.jpg


IMG_20140107_170525_328_zps56daeaa0.jpg


I wrapped all my fittings with teflon tape.
IMG_20140107_171211_464_zpscfc930ae.jpg
 
Re: Now with moar things to install.

I moved the horn to mount the IC pump
IMG_20140107_180540_929_zpse1d9f61d.jpg


Horns are now in the fender. They sound the exact same there, both pitch and volume
IMG_20140107_180532_818_zps072ddcfd.jpg


mo ho's mo prollems
IMG_20140107_190301_604_zps45b1deb7.jpg


IMG_20140107_190311_037_zps1f012835.jpg


How I mounted my fill hose
IMG_20140107_190342_489_zps090da5a8.jpg


IMG_20140107_190547_357_zpse5305e1b.jpg


Say hello to the FMHE peeking out
IMG_20140107_212243_062_zps992e2d37.jpg
 


Re: Now with moar intercooler install.

I love the way headers looked wrapped so much better than shiny. When mine come in they be getting completely wrapped as well
 
Re: Now with moar intercooler install.

Been putting around in it for a bit now. Running rich, but is otherwise happy. Did a couple pulls from different speeds, 0 knock at all times.

Now someone send me a pulley puller and some 42.5 injectors and we'll be in bidness.
 


Re: Now with moar intercooler install.

Gpona has a loaner puller iirc

I want a ride when you get back.
 
Re: Now with moar intercooler install.

Ty Ty, Anthony Smith was the inspiration. I didn't want my IC hoses going all over the place.

And Alex, why go for a ride when you can drive? I should hopefully be down in March.
 
You must log in or register to reply here.
Back
Top