New air fliter setup

[Pontiac Warrior]

I am looking at putting a spectra cone filter in my car with a chrome elbow what size am i going to need and are there any mods other than slapping it in i am going to need to make? Any help would be appreciated!!

 

[a98gtp4u]

what year car u got? make a 4" out of pvc pipe with the real big spectre filter.

 

[Pontiac Warrior]

2001 gp gt

 

[blueguy]

Safely Modding Your 3800 READ IT. There is a link on a DIY Fenderwell setup.

 

[KawaFord]

Elbow + 7" Specture filter... and you're good.

Make sure you have a fitting for the sensor in the elbow, and as far as the PCM goes, I just let mine sit there.

 

[Pontiac Warrior]

What diameter cone?

 

[blueguy]

4" inlet...as big of a filter as you can get.

 

[Pontiac Warrior]

What do you do about the air sensor?

 

[blueguy]

drill hole, install rubber gromet, stick sensor in

 

[Pontiac Warrior]

awsome thank you so much!

 

[Pontiac Warrior]

Filter is on and what a difference it makes! Thanks Guys

 

[01gtspecial]

ive got the bigg spectre filter in my fenderwell, it was really really had to fit....i used the 4" bendy air intake hose from pep boys that people on here advise against. but it works great, and i've yet to see bench flow numbers proving it wrong.

 

[blueguy]

Put a piece of pipe in there that DOESN'T bend...example...a 4" piece of PVC...and you'll see.

 

[Bio248]

no bends or SMOOTH bends. a 90* into the fender is ****ing you over.