• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Make A 4" Fenderwell Intake (FWI)[*]

Is there any real difference between this:

0808091914.jpg


and the FWI
 


Yes that is a short ram pulling hot air from the engine bay. The fwi puts the air filter in the fender pulling in cold air. fwi> short ram unless u are using alky/intercooled.
 
my question is for vailskiier. I have an 08 with the MAF like yours. How did you go about getting a leeve to fit on the air box side of the MAF. Mine bolts into the air box.. is that how yours is too?
 
Heres mine on an 07, needs a bit of cleaning up, but works great.
 

Attachments

  • IMAG0019.jpg
    IMAG0019.jpg
    44.5 KB · Views: 140
  • IMAG0023.jpg
    IMAG0023.jpg
    40.3 KB · Views: 132
Last edited:


yes but why would you need a 4 inch pipe when the throttle body its going into is only 3 inches. and the MAF is only 3 inches. Doesnt make any sense
 
Thats what I was thinking, if there is a 3 inch bottleneck at the MAF and the throttle body, I did not see that it would make much difference.
 
tlane3546 said:
yes but why would you need a 4 inch pipe when the throttle body its going into is only 3 inches. and the MAF is only 3 inches. Doesnt make any sense
Click to expand...
also my MAF is directly on my TB......so for me, the four inches allows for as much possible flow through the bends, angles and the air capacity that the IAT gauge sits........so you are getting a full three inches worth(or whatever max capacity is) into the TB......otherwise these things would not allow a true three inch pipes worth of flow into the TB.
 




You must log in or register to reply here.
Back
Top