Gauge cluster+ wheel speed

[KoldAsIce]

Dude get a cluster then pull the face and swap the odometer done.. mileage is correct

Sent from my SGH-M919N using Tapatalk

 

[KoldAsIce]

You need a 97 cluster

no you don't I have a 03 SE cluster in my 97 the gas gauge has a problem because it connects all 4 of the sender poles as where 97 only connects 3.. it's a pain but it will use whatever cluster just use the back of your 97, swap the odometer and put the face plate back on

Sent from my SGH-M919N using Tapatalk

 

[BillBoost37]

So it wasnt the spark plug wires. Wtf

Somehow...this isn't a surprise.

Since you haven't found or considered looking for grounds ... enjoy your new cluster doing the same.

 

[KoldAsIce]

^^^ Bill is very knowledgeable I'd trust his opinion

Sent from my SGH-M919N using Tapatalk

 

[BillBoost37]

Kold.. go back a page, I explained what was causing the issue... Post #12

 

[KoldAsIce]

Haha man he'd have to have one of those in order for that to be the reason.. Palmela doesn't bleed lol

Sent from my SGH-M919N using Tapatalk

 

[TimMcCallum]

I dont know which ground to look for. It is an ignition issue. You can feel it in the car. Its not the cluster

 

[REDCRAPGP]

Smdh

 

[TimMcCallum]

Its been pissing me off really.

 

[TimMcCallum]

I have checked grounds. Checked vacuum lines. Checked spark plug wires.

 

[KoldAsIce]

And it's just the rpms right? If it's revving a little different I'd say maybe something to do with the throttle body.. carbon build up etc

Sent from my SGH-M919N using Tapatalk

 

[TimMcCallum]

The mph seems to do it also

 

[KoldAsIce]

Well if your not having any issues ie revving, driving etc and it's just the cluster I'd have to assume it's either as Bill said a ground but I don't think one would just get messed up OR it's a sensor which can mess up randomly and seems to be more reasonable of a reason

Sent from my SGH-M919N using Tapatalk

 

[dsmuts]

no you don't I have a 03 SE cluster in my 97 the gas gauge has a problem because it connects all 4 of the sender poles as where 97 only connects 3.. it's a pain but it will use whatever cluster just use the back of your 97, swap the odometer and put the face plate back on

Sent from my SGH-M919N using Tapatalk

Well I meant if he wanted everything to work correctly

 

[KoldAsIce]

It will you just have to fix more then just swapping it but I understand

Sent from my SGH-M919N using Tapatalk

 

[BillBoost37]

See Kold.. if we remember, Tim swapped his diff, then an engine, then the trans.

Anyone who's swapped a motor, likely knows why I'm saying.. check your grounds.

 

[KoldAsIce]

See Kold.. if we remember, Tim swapped his diff, then an engine, then the trans.

Anyone who's swapped a motor, likely knows why I'm saying.. check your grounds.

Ahhh this I did not no and yes makes very good sense now!

 

[BillBoost37]

It's like....if you swapped a motor and all of a sudden your traction/X and Y don't work.. you might have a ground issue.

 

[TimMcCallum]

My traction and all that was actually a wire ripped out of the abs connector lol

 

[TimMcCallum]

I dont know exactly all the grounds to check are..