• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

DNA springs... yep i said it

Installed my DNA springs today and I am very happy with the results for people that are interested...I am using my stock comp g struts and the ride is basically the same as stock just a touch stiffer in corners which is nice...I will post up pics tomorow to show the drop...hope this is informative for people looking for a decent drop for $82
 


FriboRage said:
Also wondering if you're getting any kind of vibration or other problems, since you didnt say anything about motor mount spacers or shorter dog bones. Still no bounce since you didnt use anti-pogos?

Anyone have experience with this here?
Click to expand...

I notice some vibration under hard acceleration so I might try the spacers...not sure if red has that or not but thought I would let you know
 
You should not need spacers considering the drop is not that much. I don't have that and I'm on the GMPP lowering kit. You may just need an alignment.
 
Yeah I still need to get the alignment done this week so what could be part of it...what vibration I have is very small and only at WOT
 
DSC00121.jpg
 


I just made some from some 1/4 inch steel I had in the garage. If you're not running headers you can get shortened dogbones from the parts store or the junkyard instead of making or buying spacers. Just grab some dogbones from a Chevy venture minivan or a Pontiac Aztec.
 
OH4CompG said:
I just made some from some 1/4 inch steel I had in the garage. If you're not running headers you can get shortened dogbones from the parts store or the junkyard instead of making or buying spacers. Just grab some dogbones from a Chevy venture minivan or a Pontiac Aztec.
Click to expand...
Ah ok ill check that out...did your rear springs settle over time? Mine seem to be pretty high still
 




OH4CompG said:
Thats a negative ghost rider. I had poly everything and brand new axles in the gtp and I still needed a slight spacer. These springs dropped me an inch and 3/4 in the front.
Click to expand...
Yeah spacers are what I am going to do...now I just have to decide if I want to make some or buy some lol
 
I have considered them but I dont know that i can justify putting $80 springs on my DD. Its messed up, if they cost more i wouldnt be so sketched out.
 
You must log in or register to reply here.
Back
Top