• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Quest for 300whp to 350whp and more!! On M90 Blowers!!!

jayroca

jayroca

Banned
Ok guys finally fixed the issues with my motor and now im really feeling like seeing how far I can go with my setup current setup as follows
XP Cam
Double Roller
130# Springs
Stage 3 Ported Heads
SD Headers
N* lq4 combo
ZZP Stage 2 Intercooler
3.0 or 2.8 pulley along with 42 lb Injectors and a dyno tune
Oh and and GEN V her down the road

Wanted to know how much power you guys think I will put down after its all said and done? Would a bigger cam net more power like a XPZ or IS3 just wanna hear some of you guys opinions just thinking bout it recently just wanna have a little fun with her now that she is gettin where i want her thanks!

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Last edited:


Plans of E85? Already bought an ic?

Edit: You'll have no problems hitting 350whp with that setup. Built trans is in your near future;)
 
Last edited:
Elite6 said:
340 fwhp
Click to expand...

Doesn't seem bad for a prediction thanks for the hope lol

97gtpjoe said:
Any Tranny upgrades?
Click to expand...

Nope but im gettin free one from my friend his car is totaled so if I pulled it myself its mines and get it built

GMR Badass said:
Plans of E85? Already bought an ic?

Yes i just bought one and with with E85 I gotta drain all 93 octane out right and dont I need 60lb injectors? And a upgraded fuel pump? And a tune?

Edit: You'll have no problems hitting 350whp with that setup. Built trans is in your near future;)
Click to expand...

350whp With or without the gen v? Yea I will until mines kick the bucket lol no sense replacing until it does 30 and roll races for me lol no dig racing

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
With GenV and yes you'll need fuel pump, 60's, and a tune.

So don't worry about bringing the IC to Clay's gathering?
 


GMR Badass said:
With GenV and yes you'll need fuel pump, 60's, and a tune.

So don't worry about bringing the IC to Clay's gathering?
Click to expand...

What type of fuel pump? Can I still utilize the intercooler as well as without? Any guys on the forum use that combo? What pulley size is recommended for that setup? 2.7?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
jayroca said:
What type of fuel pump? Can I still utilize the intercooler as well as without? Any guys on the forum use that combo? What pulley size is recommended for that setup? 2.7?
Click to expand...

Not sure what you mean by "can I still utilize the intercooler as well as without?"

Pulley size will be determined during tuning. But if it's on E85 you'll be in the 2.8 and below range.

Fuel pump should either be a walbro or racetronix 255lph....and it's highly suggest to get a fuel pump rewire as well.
 
GMR Badass said:
Not sure what you mean by "can I still utilize the intercooler as well as without?"

Pulley size will be determined during tuning. But if it's on E85 you'll be in the 2.8 and below range.

Fuel pump should either be a walbro or racetronix 255lph....and it's highly suggest to get a fuel pump rewire as well.
Click to expand...

Sorry man meant to say what's better e85 and intercooler or just one or the other? And I have heard that a fuel pump rewire is very needed


Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
All depends on your goals....I want to keep my modding very cheap and gas mileage wasn't an issue because it was a weekend car. So for me I did no IC and put the car on E85. With stock heads (just upgrading valve springs) and SIX cam, GenV, and headers the car made 330whp/400wtq. At that point throwing on and IC wasn't really needed as it would only net 20whp more...because head work was needed to put down more than that.

With IC keep it on 93
Without IC put it on E85

Or do both....it's all up to you.
 
GMR Badass said:
All depends on your goals....I want to keep my modding very cheap and gas mileage wasn't an issue because it was a weekend car. So for me I did no IC and put the car on E85. With stock heads (just upgrading valve springs) and SIX cam, GenV, and headers the car made 330whp/400wtq. At that point throwing on and IC wasn't really needed as it would only net 20whp more...because head work was needed to put down more than that.

With IC keep it on 93
Without IC put it on E85

Or do both....it's all up to you.
Click to expand...

Sounds good man she was a torque monster! Yeah eventually i'll do both since I only drive my car maybe 3 days a week at the most i have headwork so i should be good gettin more power then with that setup what pulley was you on? * of timing?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


Jesus! Sounds like 2.8 here I come!
What type of throttle body did you use?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


what did you check with your aeroforce? what did you see that made you think it was the TPS. im still having problems. it came back again. i already changed FPR
 
TEK310 said:
what did you check with your aeroforce? what did you see that made you think it was the TPS. im still having problems. it came back again. i already changed FPR
Click to expand...

Scanned the car with aeroforce and it showed I have a tps that needed a replace along with other issues but that was the issue it wouldn't start the code still comes on tho smh what's the problem ?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
You must log in or register to reply here.
Back
Top