• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.


It was bath time inside and out today, also found my axle seal leaking again when I thought it fixed itself. Round #3 for the seal tomorrow. Hopefully this axle stabilizer thing will do it for good.
 
oh, that smooth ass.


nicks filled, primed, sanded, painted and cleared, and back on the car in about 4 hours time.

bumper5_zpsca70d195.jpg
 


I was checking all the fluids for my roadtrip and the oils about 1.5qrt low. I blame the oil pan. So I'll be picking up some oil to top off.
 


Thank you to all the men and women in the armed forces Veterans on the form. Thank you Tanker and Dirtdog to name a few for your service and protecting our ass's back here in the greatest country in the world!
 
PERF SHIFT light wont come on today shifts well just hopefully a bad bulb.... Sunday blew the heater core outlet hose for the 3rd time since I've had the car, AND THE 2ND TIME IN A MONTH
 


PERF SHIFT light wont come on today shifts well just hopefully a bad bulb.... Sunday blew the heater core outlet hose for the 3rd time since I've had the car, AND THE 2ND TIME IN A MONTH

Sounds like you need to install a braided heater hose that's meant for pressure.
 
Tossed in some new sway bar end link things. I had these sitting around for years from my first GTP. No that's not salt yet, just dirt from the dirt road I live on.

 
Almost finished my one-touch setup. Now I have one touch up and down on all 4 windows...all that's left is for the sunroof to get one touch close. That, and I finally fixed the fog light switch "on" lamp. I rewired the fog lights to stay on with the high beams, but the "on" lamp would still turn off when the high beams were on...so I fixed grounded the light green wire. Problem solved.
 
Status
Not open for further replies.
Back
Top