• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Wiring Help!!

Taz Magister

Taz Magister

New member
Alright so I got this cutout and 12volts dc and heres a pic of the wires coming from it.

taz-magester-albums-random-picture6344-imag0427.jpg


its got some kind of connector which the guy didnt have the other end to so I was planning on chopping that off and soldering my wires to it.

Heres the part thats a little bit more tricky the switch has four wires coming from it.
taz-magester-albums-random-picture6345-imag0424.jpg


and I heared that you can just use the cigerette lighter as your power source and ground is that true?

my other question is from the switch I have one red one black and a white and a green whats the deal with the white and green I assume the with is the ground correct? I guess what I don't get is I know I need two wires coming into the switch with power and then I need two wires going out or possibly one wire going out and the other already going too the cutout and then the switch would complete the circuit.

I haven't done anything like this in awhile so if someone could help make sense of this for me that would be awesome
 


What brand of cutout is it? It's not just an on/off kind of thing its a open/close action.
 


Red and Black from the switch go to power and ground, Green and white from the switch go to Red and White on the cutout
 
alright thx, does anyone know how to pop the cigerette lighter out? I'm probably just going to cut the thing off completly since I don't use it
 
You must log in or register to reply here.
Back
Top