• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Wiring an Aeroforce Interceptor Scangauge



They only had the one size, Didn't know they had smaller ones. Guess ill have to go back tomorrow and buy a new one.
Thanks
 
Make sure you have a mini-blade add a circuit. And the extra wires are for adding inputs to the gauge. I.E. Oil pressure

Edit: Didnt realize there was a second page and 99 already gave the correct answer.
 
I have a problem... I just received my aeroforce... I passed the power wire to the fuse box, and passed the wire to the OBD2 (didn't plug it yet).
I plugged my power wire in the PGM and fuse and as soon as i plug the obd2 my gauges and radio turn on without even having the key plugged in!!
I even tried the radio fuse and the same thing happens...
whats the problem!
 


It's for a 5v system. If your OBDII puts out a constant 5v, you leave the jumper in and dont wire the 12v signal. That may be your issue. I needed the 12v. Try running it with the jumper and without the 12v.
 
Is your 12v fused? The add a fuse.works best because the aerosols is picky on its 12v

Android Fire
 


I plugged mine directly in the OBD2 with the jumper on and i had to manually turn it on and it would turn off when i turned the car off but it wouldnt turn on again if i started the car (the annunciators flash)

I tried running the power wire to the PGM fuse (kept the jumper on with the wire wrapped arround the 2 connectors) and as soon as i plugged my OBD2 my A pillar gauges and my radio would turn on without even having the key in the ignition...
 
Last edited:
Owners manual?

Comes with a pigtail for analog ins and 12v power.

Connect 12v to switched power.

Also remove jumper when using 12v and I would not suggest connecting to mall/pgm fuse.
 


just picked up my aeroforce today (used) i dont have an owners manual, i need to run a power wire for it so if anyone can help me out that would be great.

Red wire is the power wire correct?

what is the white wire for and what is the green one for?

another question is when i remove the jumper i leave it out? why do you leave it out?


any help would be great i want to get it hooked up today, im gonna run to autozone and find an add-a-fuse now
 
white and green you do nothing with.

and just run the wire like he does.

I use the radio fuse and just run the wire through the car to the gauge. And just pull the jumper out if it has one and thats it, its not needed for our cars.
 
You must log in or register to reply here.
Back
Top