• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Will these fit?? Help!



SilvaMan61 said:
call the guy to confirm bolt pattern and size/ offset... then take that info and double check it in here http://www.grandprixforums.net/got-some-wheel-questions-here-29622.html

but alot of people run bullitts so id say, probably, yes. im just not sure if they run in different sizes ect.
Click to expand...

Well the guy said that they are 18x9 so idk if they will work. 9s are a little big, right? I found some 17x8 bullets tho, Do you think I would have to use hubcentric rings with the 17x8s?

Thanks
 
You don't need hub centric rings.. people say you do.. but the mustang rims I've ran before did no damage to the hub.

18x9's are what I had on my car. They are a bit wide, and those are probably a really low offset. I wouldn't be surprised if they stuck out past the fenders, my front wheels are really close. The 18x9's I put on my car had 255-45-18's on there which are a little bigger, but work fine.

The tires that are on those set of rims are too small. They probably will look weird on your car and give you a lot of wheel gap, especially with the low offset.

So... yes they will fit.. will they stick past the fenders? Probable. Are the tires the wrong size? Yes.

$300 is not a bad price for a set of rims that big though..
 


You must log in or register to reply here.
Back
Top