• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

which plugs?

S

Senshi09

New member
It's about time i do some maintence on my gpse, another fluid filter change, fuel system, and plugs and wires.

There's to many types to choose from..I want to go with the OEM delcos, but don't know what kind. Which type should I go with? I have the 3.1 motor.

Also, since Im running valvoline synthetic, should i stick with my delco filter or go with another brand?
 
Last edited:


Iridium plugs are good for my motor

I can go cheap since i should seafoam the motor. That brings another question to mind then; can i use conventional oil if I already have synthetic running through it?
 
You can. I'd just run the cheapest stuff all the time since it's only a matter of time until you start leaking coolant into the oil.
 


I can't let it die tho. It's the only vehicle currently and I need it to get to work.

Edit: since i been searchings craigslist , I cant find another 3100 & trans, but ive found a few 3800s. Would i be able to swap out my 3100 for a 3800?
 
Last edited:
Senshi09 said:
I can't let it die tho. It's the only vehicle currently and I need it to get to work.

Edit: since i been searchings craigslist , I cant find another 3100 & trans, but ive found a few 3800s. Would i be able to swap out my 3100 for a 3800?
Click to expand...

If you can get the entire harness/PCM etc, I don't see why not.

I can't remember if the downpipes are the same though, I know the catback will bolt up so you might need to buy a downpipe as well...they're cheap though through ZZP.
 


Koscoe said:
just buy a GTP and call it a day.
Click to expand...

Point me to one that is close to me and costs between 200-700 dollars and ill gladly buy it lol all the ones around me are close to 6k. Sadly I can't afford that. Especially now that its tax time :(

I have been looking into it and it does seem moderately difficult, definitely not a day job. I'll start looking into getting a 3800 and take a weekend off to tear it down and rebuild it before actually dropping it in.
 
Last edited:
Senshi09 said:
should i stick with my delco filter
Click to expand...
Absolutely not. AC Delco filters are possibly the worst ones that fit the engine. Darn near anything else is a significant improvement.
Senshi09 said:
Iridium plugs are good for my motor
Click to expand...
As long as they're Delco/Autolite/NGK. Never use Bosch, Champion, E3, etc..
Senshi09 said:
can i use conventional oil if I already have synthetic running through it?
Click to expand...
Absolutely. Won't hurt anything.
 
Senshi09 said:
Point me to one that is close to me and costs between 200-700 dollars and ill gladly buy it lol all the ones around me are close to 6k. Sadly I can't afford that. Especially now that its tax time :(

I have been looking into it and it does seem moderately difficult, definitely not a day job. I'll start looking into getting a 3800 and take a weekend off to tear it down and rebuild it before actually dropping it in.
Click to expand...


I might not be able to find one for that price, but check out the CL thread. I always post stuff in there, and since I live in Ohio they will probably be close to you....if I don't buy it first......
 
Senshi09 said:
Point me to one that is close to me and costs between 200-700 dollars and ill gladly buy it lol all the ones around me are close to 6k. Sadly I can't afford that. Especially now that its tax time :(

I have been looking into it and it does seem moderately difficult, definitely not a day job. I'll start looking into getting a 3800 and take a weekend off to tear it down and rebuild it before actually dropping it in.
Click to expand...

I'm emaiing this guy now and he is pretty negotiable with the price. Says the strut towers are in good shape, but the passanger side rockers have some "decent rust."

http://columbus.craigslist.org/cto/3556722195.html
 


I was always told that fram was damn near the worse delcos were good cuz of the whole OEM aspect of it. I'll find a new brand within the week. Lots of old car guys at work.

I did see a nice 03 on there about 2 weeks ago for only 1500, put it in my favorites looked at it earlier and its skyrocketed to 4250.
Damn these jacked prices. I like the 02+ bodies but the 95-97 motors shouldn't bhe all horribly CPU controlled which can make swapping easier.

That ad makes me think I should definately expand my search to outside the trumbull/mahoning area.
 
You must log in or register to reply here.
Back
Top