whats your dream garage....

[TorqueAutoMotiv]

Mines not much just a
50x70x14 building insulated and climate controlled
with 2 14x12 roll up doors
1 man door
sky lights throughout the roof
floresent lighting
a heavy duty floor drain
3x epoxy coated floor with non slip powder in it
a 2 post lift and a oil pit
in wall storage
and a cleared area to park at least 5 cars and a boat
out side would be a large car port with pressure washer
there would also be a 12x12 room off the side used for when this old dog is in the dog house
mock up drawing to come

 

[Warbeaver]

one full of young hot women that do all the work for me....and do it right :th_thumbsup-wink:

 

[KawaFord]

one full of young hot women that do all the work for me....and do it right :th_thumbsup-wink:

And are willing at ANY moment.

 

[TorqueAutoMotiv]

if you build it she will cum

 

[Thunderturd]

lolol

 

[Lawngoose]

one full of young hot women that do all the work for me....and do it right :th_thumbsup-wink:

that was my first thought too!

 

[alkygto]

Don't forget a full bath with a urinal and a shower. How about an office/lounge area as long as we're dreaming (flat screen tv, beer fridge and microwave). Also, if it's a separate building, an outdoor enclosure for the 80 gallon two stage air compressor.

I've got a buddy with a 60' x 100' shop next to his house. He's got the lift (which is real nice) and he's drywalled and painted the interior, with an office/lounge that looks like an old gas station complete with pump, an old bottle vending machine and tire display.

As for me, I've got to make do with my dinky 25 x 34 attached garage. Why do you always seem to have more cars than places to park them? :th_laugh-lol2:

 

[Fivefingerdeathpunch]

A big one.

 

[rocafella2032]

one that doesnt have a GP in it.

 

[Biohazed]

6 Bay garage with a 2 post lifts in it. on the one bay would be a complete full sized automotive spray booth, for tool storage a Snap On War Wagon, parts washer, road force capable balancer, tire machine, Drill press, 240v or better MIG welder, full shop air, Large grinder(stone & Wire Wheel), Brake Lathe, and a 20 ton Hydraulic Press.

 

[alkygto]

Bridgeport mill and a 16 X 36" engine lathe, both with DRO's. How about a dirty room with a full welding station with MIG, TIG and a plasma torch and an exhaust fan.

 

[TorqueAutoMotiv]

i figure when i move after the old ladys outta school there will be a min of a 50x30 shop going it those steel buildings cost 6000-15000 as long as you have the foundation poured

 

[coreygnar]

i figure when i move after the old ladys outta school there will be a min of a 50x30 shop going it those steel buildings cost 6000-15000 as long as you have the foundation poured

all you need is i-beams and sheet metal basically and the foundation

 

[JarenSTi]

one with a saleen s7 and a trans am ws6 in it