• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

what is this gunk????

dont forget to cover your coils and alternator so they dont get soaking wet. and intake cone if you have one.
 


well its only on the valve cover and a little on the supercharger and LIM i would be spraying it with a hose id use a squirt bottle
 
if your all stock just hose everything, its all water tight. unless you have a open cone air filter, its all safe to get wet. been hosing whole engines for 20 years.

stay away from power washers, thats a good way to rip wires out and break vac lines. garden hose full blast, thats all you need.
 
I typically dillute 50/50 with water. FWIW somehow there's a 5 gallon pail in the corner of my garage. (only because I got a deal on it).
 


i like it to also but have seem people do damage, and a garden hose is really all you need.

if you must power wash get a hotsy, or steam cleaner. make it worth the while....
 
I'll show ya how well cold will work with a pressure washer. Just saying

Before:
IMG_5997.jpg

IMG_5994.jpg

IMG_5991.jpg


After
IMG_6012.jpg

IMG_6011.jpg

IMG_6004.jpg


Nothing but some purple power and a pressure washin
 


Yep purple power with a stiff bristle brush then some type of protectant on the robber parts may take two trys very hot water or pressure washer to rinse it off is real good
 
Should I be like everyone else and keep suggesting suggestion even though he already responded with what hes going to do or may have already done?
 
You must log in or register to reply here.
Back
Top