• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.


Thanks! And yes it does actually, seems a lot smoother and less hesitant when asked to get moving. My filter was so loose, I was surprised it was still on. So I got it retightened, should be good to go I hope.
 
well i put gas in it and then went out and ****ed a kid with a ss cobalt cause he had a "smaller pulley on" and i couldn't take him cause my car weights a ton. lolz
so his gf and him thought they had me. but all **** talking aside i don't think he thought i was supercharged and my zzp exhaust he thought was a muffler leak lol
 
Papers this morning, cleaned out the drink cups and hot dog plastic holders from my sons. Have to contact Rock Auto to find out the warrenty on a hub assembly, as that was the thunking noise I've heard in my front right wheel well - not springs or struts. Oh well, at least the struts WERE bad, so replacing them wasn't a complete waste.
 
Ordered a Dorman front sway bar to fix my cracked stock one. 139$ shipped from rock auto even with shipping still 50 - 100$ cheaper than buying anywhere local...
 


Ordered replacement hub assembly for my GP, should have it for install next weekend. Only going to cost me return shipping to RockAuto.
 
Got heated drivers seat and switch, wiring harness ect from the junkyard. I'll be glad i paid the 30 dollars and sweat for 2 hours getting it out in about 4 months. lol
 


Finished running the new rear brake lines. looks like a coat hanger abortion. but it still works the same.
did a test drive and was still able to terrorize the neighborhood so, i'm happy.

Also got a chance to put in the HID fogs i've had lying around.


Now that's all said and done.

time to finally buy lowering springs and get this suspension in and done.
 
went to sandblast more rims.
found out my ss valve stems dont fit, need to find small ss washer.

had to drain the sand and rebuild the blast gun, he was going to buy a new one - 20 min and worked better than ever :cool:, now needs a new feedline(sand).

So have to do more next week.
 


I replaced the snout, did plugs and wires, seafoamed, changed lower motor mount, rear brakes, pass brake line, and bled brakes in return for my dhp tuner.
 
Status
Not open for further replies.
Back
Top