• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.


I only got a lot because im going to flush with coolant after I use the hose to rid most of the well water out of the block. Then just do as per your how to and dump a gallon of coolant in the rad and add water till full. I just wonder the ratio I would end with, leaving however much 50/50 stays in the block after flushing the well water out plus adding a gallon of concentrate and flling the rest with water. If its stronger than 50/50 I wont complain because it got cold as **** last year.
Sent from the Milky Way


Sent from the Milky Way
 
run the car till nothing comes out, then dump the distilled water in flush till its clear, then add the coolant, and top off with more distilled water if need be.
 




I think the PO douched it up, the bolt came off all weird, and the other side is missing a lot of threads to

Sent from the Milky Way
 
Probably going to have to replace the LIM, the bolt goes in at the completely wrong angle for a tap I think.

Sent from the Milky Way
 


I took this off


Did some intensive cleaning to this


Used all of this


and ended up with this


Took most of the day. But I had fun doing it. Now the car runs a bit btr and makes a bit more noise. Cool.
 
Yay for taps!

bama7aju.jpg

udy6umem.jpg

3yju4yza.jpg
muge6y7e.jpg


Sent from the Milky Way
 
Status
Not open for further replies.
Back
Top