What did you do to your Car today?

[raverockstar]

Is it the wrench thing?

 

[91parkave]

No it looks like a socket just has a slit up the side for the wires to run through while you turn it.and as always make sure you disconnect the 02 wiring harness first

 

[raverockstar]

That's what I'm using.

 

[danielle15]

Any tips on pulling the horn fuse block? I cannot get the thing loose.

 

[91parkave]

That's what I'm using.

Oxygen Sensor Socket | AutoZone.com

Any tips on pulling the horn fuse block? I cannot get the thing loose.

Needle nose pliars. Gently rock back and forth itll come out

 

[dsmuts]

Danielle pull the wires off the horn

 

[danielle15]

I just need a temp fix until tomorrow mid day to shut the horn up. Ilk try with pliers and if I still can't get it ill pull wires

 

[dsmuts]

There is a little clip on the horn I believe that you can just unhook then reconnect after its fixed

 

[danielle15]

Hmm, where is that beast located? Front bumper area?

 

[dsmuts]

Yeah. Have some one honk the horn in short bursts and you'll find it in a hurry

 

[Thinksun]

That's what I'm using.

You said you wrecked the sensor you are removing? Whenever I replace a junk 02 sensor I just cut the wires and use a deep socket. Heat helps removal, and use never seize on new one if you want to take it out later.

 

[REDCRAPGP]

Hmm, where is that beast located? Front bumper area?

If its anything like the 04s. Passenger side behind the fog light attached the frame.

 

[rperry435]

Let me know how you did the door panels. I wanna change my inserts! Thanks

It's not bad. Pull off the door panel. Drill out the 8 or so plastic rivets. Peel off the old fabric, soak it in super hot water so the rest of the foam and glue (underneath the fabric) comes off. Then just copy and outline the old fabrics shape on the new fabric & foam then cover it. Used some spray adhesive and staples to hold the new fabric on and hot glued the finished peice to the door creating a new plastic rivet.

Sent from my SPH-L710 using Tapatalk 2

 

[stealthee]

Even my roommate trying lol

I see she has knee pads on......

 

[mudneck4]

Can anyone explain how I did this to a gto? The laugh at the end is the haha you just got walked did it 6 times 50+ year old guy atleast he gave a friendly wave!! http://i1249.photobucket.com/albums...4B88547-3141-000003B4F4F737D2_zps215b4ddb.mp4

 

[REDCRAPGP]

It's not bad. Pull off the door panel. Drill out the 8 or so plastic rivets. Peel off the old fabric, soak it in super hot water so the rest of the foam and glue (underneath the fabric) comes off. Then just copy and outline the old fabrics shape on the new fabric & foam then cover it. Used some spray adhesive and staples to hold the new fabric on and hot glued the finished peice to the door creating a new plastic rivet.

Sent from my SPH-L710 using Tapatalk 2

That's a similar method to how I did mine

 

[osiris94ej]

Any tips on pulling the horn fuse block? I cannot get the thing loose.

Pull the relay.

Sent from my SCH-I535 using Tapatalk 4 Beta

 

[rperry435]

That's a similar method to how I did mine

Got pics of yours? Just curious to see what fabric you used.

Sent from my SPH-L710 using Tapatalk 2

 

[danielle15]

Pull the relay.

Sent from my SCH-I535 using Tapatalk 4 Beta

The relay is what I was trying to pull with no luck. Found the mini fuse and pulled it instead. Much easier.

 

[dsmuts]

I drove to work found no one there to help me stayed for 30 min to get paid enough to pay for my gas then drove home. Nice to have a day off.