What did you do to your car today? Vol 2.0
- Thread starter Mad Monkey
- Start date
Nates94
New member
Re: What did you do to your Car today? Vol 2.0
Dirt roads aren't very kind this time of year.
Dirt roads aren't very kind this time of year.
AaroGaming
New member
Re: What did you do to your Car today? Vol 2.0
Should be picking up an 89 Camaro RS for $400 some time this month! Just gotta roll it across the street and it'll be in my grandma's yard LOL
Edit for pictures:
It's got a bunch of parts in it, it needs a starter solenoid and a battery, probably a fluids change, and it will hopefully start up with very little work.
Parked in 2011, last ran in 2014.
Should be picking up an 89 Camaro RS for $400 some time this month! Just gotta roll it across the street and it'll be in my grandma's yard LOL
Edit for pictures:
It's got a bunch of parts in it, it needs a starter solenoid and a battery, probably a fluids change, and it will hopefully start up with very little work.
Parked in 2011, last ran in 2014.
Last edited:
Kaiser Pontiac
New member
Re: What did you do to your Car today? Vol 2.0
Took it through its third car wash since I got it, never driven so slow before on the way home, lol. Snapped some pics too.
Took it through its third car wash since I got it, never driven so slow before on the way home, lol. Snapped some pics too.
ericspecullaas
New member
Re: What did you do to your Car today? Vol 2.0
I got you beat on that. We got a 92 z28 with a 5 speed and a 5.0 for 400
Should be picking up an 89 Camaro RS for $400 some time this month! Just gotta roll it across the street and it'll be in my grandma's yard LOL
Edit for pictures:
It's got a bunch of parts in it, it needs a starter solenoid and a battery, probably a fluids change, and it will hopefully start up with very little work.
Parked in 2011, last ran in 2014.
I got you beat on that. We got a 92 z28 with a 5 speed and a 5.0 for 400
AaroGaming
New member
Re: What did you do to your Car today? Vol 2.0
Sent from my SM-G900V using Tapatalk
Idk how that's beat lol, automatics are faster because of consistency and lack of human error. Otherwise it's 305 vs 305 and they're both $400
Sent from my SM-G900V using Tapatalk
idrivejunk
Active member
Re: What did you do to your Car today? Vol 2.0
If that thing is solid underneath, I would beat the crap out of it with a stream of castaway small blocks which get yanked for an LS these days and end up on CL. Don't get me wrong, I'm not into 3rd gens but how can you argue with scrap price?
I bet you'll get it going and make out like a champ if you fix it up juuust a little. If you mod it, I say work out exhaust system first. Not easy on those and I don't know about you but I tackle the difficult things first.
If that thing is solid underneath, I would beat the crap out of it with a stream of castaway small blocks which get yanked for an LS these days and end up on CL. Don't get me wrong, I'm not into 3rd gens but how can you argue with scrap price?
I bet you'll get it going and make out like a champ if you fix it up juuust a little. If you mod it, I say work out exhaust system first. Not easy on those and I don't know about you but I tackle the difficult things first.
AaroGaming
New member
Re: What did you do to your Car today? Vol 2.0
I'd say cleaning up the body would be more difficult, there are paint chips on the fender flares already, and tackling and rust issues would be a huge priority once it runs, drives and stops
Sent from my SM-G900V using Tapatalk
I'd say cleaning up the body would be more difficult, there are paint chips on the fender flares already, and tackling and rust issues would be a huge priority once it runs, drives and stops
Sent from my SM-G900V using Tapatalk
Bronco Boy
Donating Users
Re: What did you do to your Car today? Vol 2.0
Did the "02NavyBlue" power steering cap upgrade.
Did the "02NavyBlue" power steering cap upgrade.
02NavyBlue
New member
Re: What did you do to your Car today? Vol 2.0
Haha nice! Interested in pics after some driving.
Something I noticed is that the reservoir is pretty shallow where the dipstick is, so the magnet cannot stick out very far. It also means the magnet being long can't possibly come out of the dipstick. But rtv and a sort of press fit won't let go.
Sent from my HTC One_M8 using Tapatalk
Haha nice! Interested in pics after some driving.
Something I noticed is that the reservoir is pretty shallow where the dipstick is, so the magnet cannot stick out very far. It also means the magnet being long can't possibly come out of the dipstick. But rtv and a sort of press fit won't let go.
Sent from my HTC One_M8 using Tapatalk
AaroGaming
New member
Re: What did you do to your Car today? Vol 2.0
Changed the S/C oil in the GTP, took out 2oz that were really dark, and it took 8oz to fill to the threads and it looked like it could take a little more.
If the previous owner ported it out would that make it take more oil? Iirc it should only take 6oz
Sent from my SM-G900V using Tapatalk
Changed the S/C oil in the GTP, took out 2oz that were really dark, and it took 8oz to fill to the threads and it looked like it could take a little more.
If the previous owner ported it out would that make it take more oil? Iirc it should only take 6oz
Sent from my SM-G900V using Tapatalk
Kaiser Pontiac
New member
Re: What did you do to your Car today? Vol 2.0
Tried not to drive into the ditch with all the wet slush on the roads, ugh, now its 25mph winds and snowing at 34F. Yuck.
Tried not to drive into the ditch with all the wet slush on the roads, ugh, now its 25mph winds and snowing at 34F. Yuck.
stealthee
New member
Re: What did you do to your Car today? Vol 2.0
Lets see over the last few days I did a few things. I had my issue with the HDM relay "failing" and having no low beams. As mentioned earlier I modified the high beam bulbs to twist into the low beam socket of the headlight so I could drive safe, and not blind oncoming drivers with just high beams. While under the hood I checked all my fluids. After 3000 miles on the oil its still in the cross hatch.
Yesterday I got a brand new Turtle Wax Black Box kit for FREE!
Today I ordered a BDW HDM relay from Advance and went and picked it up. I put the low beam bulbs back in their normal spot. Ironically the OEM HDM relay started working again. I went ahead and kept it in its place and put the the BDW in the glove box in case it happens again.
After I got home I took advantage of the 50* temperature and gave the car a quick and dirty hand wash. Didn't spend my usual time on it and wasn't as picky because there is a chance for snow in the next few days anyway. I just wanted to get the crud off.
I topped off the right rear tire which apparently has a slow leak around the bead. I need to stop at my buddy's shop and have him take it off the rim and clean the bead up for me to see if it helps.
Lets see over the last few days I did a few things. I had my issue with the HDM relay "failing" and having no low beams. As mentioned earlier I modified the high beam bulbs to twist into the low beam socket of the headlight so I could drive safe, and not blind oncoming drivers with just high beams. While under the hood I checked all my fluids. After 3000 miles on the oil its still in the cross hatch.
Yesterday I got a brand new Turtle Wax Black Box kit for FREE!
Today I ordered a BDW HDM relay from Advance and went and picked it up. I put the low beam bulbs back in their normal spot. Ironically the OEM HDM relay started working again. I went ahead and kept it in its place and put the the BDW in the glove box in case it happens again.
After I got home I took advantage of the 50* temperature and gave the car a quick and dirty hand wash. Didn't spend my usual time on it and wasn't as picky because there is a chance for snow in the next few days anyway. I just wanted to get the crud off.
I topped off the right rear tire which apparently has a slow leak around the bead. I need to stop at my buddy's shop and have him take it off the rim and clean the bead up for me to see if it helps.
CrazyGuy03
Active member
Re: What did you do to your Car today? Vol 2.0
no
"The message you have entered is too short. Please lengthen the message by at least 3 characters"
no
"The message you have entered is too short. Please lengthen the message by at least 3 characters"
idrivejunk
Active member
Re: What did you do to your Car today? Vol 2.0
Played with the eight banger in the driveway for awhile and I'm sure the neighs all loved that. Then I went for a spin.
Played with the eight banger in the driveway for awhile and I'm sure the neighs all loved that. Then I went for a spin.
Bronco Boy
Donating Users
Re: What did you do to your Car today? Vol 2.0
Pics for sure. I am curious myself on what I might catch on the magnet. I plan on keeping an eye on it; hopefully it stays put.
02NavyBlue
New member
Re: What did you do to your Car today? Vol 2.0
Looks like yours was a bit smaller in diameter, how did it fit? Like I had mentioned I drilled mine out carefully for the larger one I used and it fit very well
Sent from my HTC One_M8 using Tapatalk
Looks like yours was a bit smaller in diameter, how did it fit? Like I had mentioned I drilled mine out carefully for the larger one I used and it fit very well
Sent from my HTC One_M8 using Tapatalk
Russosaur
Moderator
Re: What did you do to your Car today? Vol 2.0
I think they had a recall for the headlights because they did that. Not sure which all years it effected thoLets see over the last few days I did a few things. I had my issue with the HDM relay "failing" and having no low beams. As mentioned earlier I modified the high beam bulbs to twist into the low beam socket of the headlight so I could drive safe, and not blind oncoming drivers with just high beams. While under the hood I checked all my fluids. After 3000 miles on the oil its still in the cross hatch.
Yesterday I got a brand new Turtle Wax Black Box kit for FREE!
Today I ordered a BDW HDM relay from Advance and went and picked it up. I put the low beam bulbs back in their normal spot. Ironically the OEM HDM relay started working again. I went ahead and kept it in its place and put the the BDW in the glove box in case it happens again.
After I got home I took advantage of the 50* temperature and gave the car a quick and dirty hand wash. Didn't spend my usual time on it and wasn't as picky because there is a chance for snow in the next few days anyway. I just wanted to get the crud off.
I topped off the right rear tire which apparently has a slow leak around the bead. I need to stop at my buddy's shop and have him take it off the rim and clean the bead up for me to see if it helps.
Bronco Boy
Donating Users
Re: What did you do to your Car today? Vol 2.0
I just went out and checked, and all is still in place, and no shavings yet after a 40 minute drive.
Mine are 1/8"x 1/8", and the hole in the cap is a hair over 1/8". I used two magnets, the first one being more of an anchor for the exposed one. I put some silicone in the hole and let it set up a bit, then put more in and set the magnets. After the fact, I'd say a 3/16" magnet would have been a better choice.
I just went out and checked, and all is still in place, and no shavings yet after a 40 minute drive.
stealthee
New member
Re: What did you do to your Car today? Vol 2.0
I got a notice a few months back that a recall was coming, but as of yet the recall hasn't happened. I don't think they know what is actually making the relay fail, that's why it's taking so long. A new relay is only a bandaid, it's failing because of another issue.
I got a notice a few months back that a recall was coming, but as of yet the recall hasn't happened. I don't think they know what is actually making the relay fail, that's why it's taking so long. A new relay is only a bandaid, it's failing because of another issue.