Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.
Its the Solenoid. I am getting a code p0243 and I dont think I am making full boost as under WOT the boost gauge on my Info Center is only going to half full if that..
Hey man, unplug the vacuum line on the bottom of the boost bypass valve going to the solenoid. If you get full boost it's likely the solenoid that's bad.
Ok. So did as you asked (getting that tube off was a royal pain in the ass) and then took it for a drive. WOW!!!! It feels like a whole new car. Info Center is giving me full boost on gauge. So where do i pick up one of these solenoids?
you could probably pick one up at your local picknpull in Tacoma. Should be a few supercharged 3800's there. All it takes is a 10mm nut to take off and unplug it from the connector and vacuum lines. I don't even run mine on my race car. It's mostly so the PCM can pull boost for traction control purposes but if you don't have a tuner to turn the code off it'll set a check engine light