• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Truck pulls



I work at Wyotech In Blairsville PA and we have a 24V Cummins that has a 72mm turbo huge FMIC, spraybar and big ass stacks up thru the bed. the Truck makes a little over 680 HP and 1370ftlb of torque at the WHEELS on a stock trans with a billet input shaft We broke the transfer case on friday night at a pull students were working on it this morning.

search you tube for Wyotech Pull truck
 


I haven't been to one in a couple years. I used to go to a couple truck/tractor pulls each year. I like watching some of the big tractors haul down the track.
 
Don't pay attention to it as much as I used to but here's one my brother-in-law helped build. He used to be really good friends with the guy that runs it. Burns through something like 8 gallons between pulling into the lane and shutting down.

He found out that a stock cummins block splits down the middle at around 140psi. He's well over that now.


http://smoknya.com/
 


You must log in or register to reply here.
Back
Top