• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Trouble codes after header install

dsmuts

dsmuts

Moderator
I'm getting trouble codes after i fixed my burnt wiring following my header install. I'm getting a P0102 maf or vaf a circuit low input and a P1676 which my code reader says dtc not found. When i try to rev my car it cuts out for a sec then catches up. Does the same thing with the maf unhooked. I also am running catless and don't have a rear O2.
 


I didn't do headers but got the P1676 after having my EGR removed and doing a ported S/C and tune. Nick just tuned it out for me.
 


I soldered them together. no others. It was a vacuum leak at the brake booster. My trans dipstick was pushing against it lol
 


I figured it out!!! When the wiring burnt it popped the #21 fuse under the hood. Changed the fuse and all is good :) I'm very happy now i can beat on my car again without worrying about it breaking.
 
You must log in or register to reply here.
Back
Top