• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Top of the struts under hood





Mine did the same thing. I heard about the pogo washers and made my own.My shocks were good at the time too.I used some actual washers from rural king.Doesnt look 2 bad ether.
 
All that is needed is thicker washer under the factory cup. You can remover the factory cup by romoving the center nut, and install a thicker washer under the factory cup to tighten up on the bushing. You can actually adjust your ride by how thick the washer is and is putting pressure on the bushing.
AN impact wrench mackes removing and reinstalling the center nut a sinch.
 
You must log in or register to reply here.
Back
Top