• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Swaybar Sizes



From everything I read and looked for they're not being made anymore. you can still find their stbs and trailing arms etc. but the sways are discontinued.
 
So I just received my SLP sway bars from UPS today. The rear bar is definitley NOT 25mm. I'd say it's closer to 19-20mm. I didn't have time to measure them before leaving for work. Also I'd say the front is actually 34mm and not 35. The 35mm bushing I have for it did not fit snug around the bar but had about a 1mm gap. Maybe that's normal and there's suppose to be that much room. I thought it was suppose to be pretty snug around the bar though. If the front is 34mm and the rear is as small as I think I'm going to be returning them and buying other bars.
 


ok i have a rat rear swaybar and im hearing noise back there when i go over bumps i put it up on the lift and there is play in the swaybar when i move it, so im guessing i need new bushings or endlinks? can i still get them somewhere or do i have to buy a different swaybar?
 
You if my memory serves me correct for rears...just the end links should be all u need as long as ur sway bar isn't cracked
 


if you have a 97-03 you need 2x Moog k6662 end links for the rear. If you need new bushings just find some poly ones with the corrects dimensions which I believe are 27mm.
 


You must log in or register to reply here.
Back
Top