• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Swaping engine and trans from top ( first timer)



It seems to fit well where you said. Is there a diy vid anywhere on how to bond two wires properly with a torch? Do I need to add anything to it?

I can't seem to find a location for this guy, hes right next to the big circle sensor that goes into trans.
2s1qclz.jpg
 
Does anyone know or can possibly check where the wire next to the big circle trans sensor runs to? The pic is right above runs by the air box
 


where ever it goes, its with in reach of where it is now. a/c plug, or something. didnt you take some ac relay stuff apart over there that bill said you didnt have to? maybe it goes there?
 
I'll double check that. I was looking at the gp pics and it seems to be an air intake sensor that goes into intake house except my hose doesn't have a plug for it..hmm
 


you know what, being thats a blue plug, see if its the plug to the rack, if it reaches to the shiftier area thats it. the wire off the rack is on the drivers side off the round part with the grey boot to the cars cab.
 


I disconnected it to clean out the port I had everything ready so I tried connecting and it almost sounded like it was trying to turn on
 
if you touch the large stud and the little one with a live cable it will crank the engine over, its how you jump the starter, so you had the cable with live power while putting it back on the starter right?
 
No i disconnected it from the battery when i was connecting everything down there im trying to picture what ive done wrong. I followed all the oics and wire orders for the starter.
 
You must log in or register to reply here.
Back
Top