• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Supercharger leak

N

nvrstsfd23

New member
I had a idler pulley for the supercharger break and the belt shredded and wrapped all around the supercharger pulley. I thought it messed up the snout seal. So I replaced the idler pulley and the snout seal and put fresh oil in it. Took it for a drive and when I got back it had threw oil all over again. My question is could I have messed the seal up when I installed it or did teh belt that got wrapped around the supercharger pulley maybe bent the shaft a little and that is tearing up the seal. Also if I decide I need to replace the snout wheres the best place to get it. Thanks for you time and input.
 


the aftermarket seals always leak also did u use the socket trick to put the seal on and lubed it up well before you installed it...prob wouldnt have messed with it was prob still ok..you also may have rolled the new seal if u didnt use the socket trick to install
 
00grandprixgtp said:
the aftermarket seals always leak also did u use the socket trick to put the seal on and lubed it up well before you installed it...prob wouldnt have messed with it was prob still ok..you also may have rolled the new seal if u didnt use the socket trick to install
Click to expand...

I used a socket but maybe didn't do it right. Is there a link on how to install it and make sure it's right. What should I do and buy a new seal
 




You must log in or register to reply here.
Back
Top