• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

supercharger 3.4 pulley help

beattie

beattie

New member
ive looked all over and wanting to get a little bit more advise before i do anything....im lookin to put a 3.4 pulley on my 97 gtp but dont have anything done yet whats the bottom i can have done b4 puttin this on....im gona order a pcm from 3800 performance... one place was saying all i have to do was take out ubend and get colder plugs but find a lil hard to believe...and if i get a 3" down pipe what else has to go with it dont really have much money to spend at the moment tryin to get bye will the least i can for now thanx...
 


if your trying to save money, get Speed Daddy headers off ebay for $200 +/- off ebay.
lots of guys are using them, they'll work just fine.

get the colder plugs, then get the pcm setup for it.
 


Link in my signature.

Read; research.

Your post basically shows you really haven't looked, or if you have...didn't find any info worthwhile.

Also; if you don't have the money to do it correctly, then don't do it until you can afford it. Because when you spend every last penny on go fast parts and then you break something...you'll but up sh1t creek with no paddle halfway to BFE.
 


Its like working on the house... Figure what you want to spend, but save 2x as much, cause that's what it'll wind up costing ya'.

Lol... Just sayin!
Best to be prepared!!
 
Matt LE-FAG Palm said:
Nope 238 one day near 500 the next and a couple days later out of stock
Click to expand...
Jut went to eBay to check it out myself very true can't believe how much they upped the price and only on the 3800 headers nothing else. The company is located about 20-30m away from where I live so pretty close. Might have to call them or drop by and check to see why the huge price difference.
 
Pontiac Performance Racing Products for International Sales from SSAutochrome Inc.

Same as the Speed Daddy off Ebay, $175.00 + 50.00S&H. Might want to call or email and make sure they still have stock, if they do they are just as good as the SDs.

The flex pipe is single wall and kind of weak, may consider a zzp dual wall flex to have welded in place later on, and you will want better clamps than the ones they provide if you don't want any leaks. Otherwise a good set of cheap headers.

http://www.grandprixforums.net/97-03-w-body-buyers-guide-common-problems-60802.html
http://www.grandprixforums.net/safely-modding-your-3800-a-67580.html
http://www.grandprixforums.net/ultimate-cheap-mod-thread-free-50-a-49055.html

Headers, Intake, tune, 3.5/3.4 pulley... winning for cheap.

But you have to have flow, more air in without more air out means something somewhere is going to break under pressure.
 


untitle.JPG


Do as we say. Save money. Profit.

If you do that, it still won't flow well enough, unless you like the idea of chipped pistons. Then by all means.
 
You must log in or register to reply here.
Back
Top