ssic

[oneredi]

So i got my ssic in but i am getting oil blow by coming from the dipstick.I have the lower intake from zzp just seeing what was going on.what am i missing here.i have no kr with the 3.1 on just got this oil going all over. vac.is 19
Thanks

[TD="colspan: 3"]1999 GTP Black coupe
3.3 pulley, SSIC,Ported Blower ,N*TB,Poly motor mounts,TOGS.,wizaired, 3" exhaust 180 stat.AL 103 ,1.84 rr,New tranny with ZZP 2500 Stall Shift kit
OverKill PCM, Power Slot rotors [/TD]

[TD="class: info, colspan: 3"] [/TD]

 

[dsmuts]

Your pcv is blocked.

 

[gtpsleeper]

^^^ this...

you need to either throw a breather on or do the front pcv mod...

 

[oneredi]

i put a breather on the front i am still getting oil coming from the dipstick.

 

[dsmuts]

Oil is coming out of the dipstick hole?

 

[Swiggles]

Did you use rtv to seal the ic to the lim and sc?

There's an oring on the dipstick tube where it goes into the block, that might need to be replaced. There's also 2 on the dipstick that might need to be replaced.

 

[oneredi]

Did you use rtv to seal the ic to the lim and sc?

There's an oring on the dipstick tube where it goes into the block, that might need to be replaced. There's also 2 on the dipstick that might need to be replaced.

yes it is coming from the dipstick the car runs fine.
no rtv on the lim to ic plate.
oki will try the orings
thanks