• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

slammed finally

BoostJunki3

BoostJunki3

Needs A Turbo
got my eibachs on today....this has to be my favorite drop for these cars....super low with a great ride....excuse the shyty cell pic more pics later....

lowred.jpg
 


Bio248 said:
see, i told you that you would like them. how much did you cut the bump stops?
Click to expand...

the eibach specs for the kit were to cut the fronts 20mm from the bottom and to leave the rears alone...i did this and it rides great stiffer and bumps are more pronounced but nothing butt rattling...i actually hit a pot hole today and it wasnt bad at all just gotta be careful of speed bumps not esp. with that stupid pace sh1tter dp.
 


snow isnt an issue. i did it and so can you. the front end just plows a little bit more. you have enough power to make it through the snow even with it like that.
 


bluegtp91 said:
Where's those Cobra wheels I told you that wouldn't fit?
Click to expand...

i sold them without the tires to buy something more practical...i would rather be lowered and get different ones....i could have made it happen but too much modification was required im gonna bolt them on one time before the guy picks em up just to see how nasty it would have been tho :)
 


Stunt0Rider said:
WTF.

Just take off the damn tires while our at it too. 3" to 4" would be scraping the ground all the damn time.
Click to expand...

yeah this drop turned out to be about 2 inches give or take and i have to watch my driving ....3-4 would be like sledding the whole car with out wheels :D
 
Stunt0Rider said:
WTF.

Just take off the damn tires while our at it too. 3" to 4" would be scraping the ground all the damn time.
Click to expand...

IMO if there is wheel gap, it's not low enough. i want mine to sit like this, i don't want to drop it and still have a gap. to each his own though, i'll probably have to settle for just a 2" drop since i don't want air on mine.
 

Attachments

  • lowred copy.jpg
    lowred copy.jpg
    100.4 KB · Views: 44
Bio248 said:
get intrax springs. they are the lowest drop spring you can buy, but the ride suffers immensely.
Click to expand...

i'm used to DDing a completely gutted car, with a CF seat,and 10k/12k coilovers put as low as they would go. i would show you but it's not american and i don't want to start a riot. had to roll the fenders, AND use a sledge to bend the pinch weld in the top of the fender to clear the tires.
 
You must log in or register to reply here.
Back
Top