• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

SeanGTP's Generic GP - Retrofitted Angel Eyes on PG 5



Re: That Black GTP

i love'm. my stocks were faded to hell, had like $60 bulbs in them and barely saw anything. now their so bright i can basically see through things haha
 
Re: That Black GTP

Just ordered a set. Had to order corners separately, didn't see any sets that came with the white reflectors. Shipping on the headlights was a *****, but that's probably just to make them look cheaper than they were. $110 for the lights total, $32 total for corners.
 
Re: That Black GTP

yea the seller(s) do that, they'll list the same headlights with different ads that are all basically the same with a bunch of different prices and shipping prices, but all add up to equally about the same across the board
 


Re: That Black GTP

heads and tails on ebay are pretty much for any car, are the same you could buy at an online retailer for usually a ton less, just with these you have to seal them up more to prevent water from getting in, hence the faint, rough, untrimmed edges on mine
 
Re: That Black GTP

TADA!
DSC01195.jpg

DSC01197.jpg

DSC01198.jpg

DSC01199.jpg

DSC01200.jpg
 


Re: That Black GTP

PLUS36 said:
TWO HEADLIGHTS!?!?!? no way.
Click to expand...

No, he just has the amber turn signal bulbs, mine are clear, and when i have the red ones in they'll be black. but if you do the clear/white bulbs they'll blend right in like a dream :th_thumb-up:
 
Re: That Black GTP

I think the bracket part that holds the assembly to the car is really bent, and I also think this new bumper cover sag a bit over on that side. I'll get it fixed... eventually.

Edit: Look at the driver side corner, and look how it sits crooked compared to the space provided from the fender bumper-cover. Almost proof that it bent.
 


Re: That Black GTP

SeanGTP said:
I think the bracket part that holds the assembly to the car is really bent, and I also think this new bumper cover sag a bit over on that side. I'll get it fixed... eventually.

Edit: Look at the driver side corner, and look how it sits crooked compared to the space provided from the fender bumper-cover. Almost proof that it bent.
Click to expand...


I forgot to tell you to reuse the original headlight brackets not the new ones, they are junk. or at least mine where, I swapped brackets and their fine.
And Blue, these headlights are nice, but i think when the company took their measurements for reproducing them. They must have screwed up because, to me, they are, or at least look thinner then the original ones. When i aimed mine to where I wanted them, I ended up having enough space between the bumper and the new headlight to fit a sandwich in. honestly, i had to aim them down, not by much. but down from where i wanted them. so i don't think it's his fault for having headlight gap.
 
Re: That Black GTP

I can't use the originals... the passenger light I had in before got completely demolished in the accident. Doesn't make sense to have one secured in headlight and one bouncy one.
I just put weatherstripping on the top and bottom of both lights, they sit snug now.
 
You must log in or register to reply here.
Back
Top