• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

SE/GT Compatibility

ShadowSwept

ShadowSwept

New member
Is there any functional difference between the motor mounts in the SE and GT? I noticed the front mounts on the SE hook over the front of the frame, while the GT is simply bolted to the top and almost looks incomplete. I kind of like the look of the SE mounts better and was considering swapping. Any thoughts?
 


I think some years were different not the trim level. I have a buddy with that same style wrap around mount on his 97 gtp. I would guess the would be swappable though you may have to fine tune the holes in the support a bit
 
gt ones
DSCF1487.jpg

PA150053.jpg

Mine se
PA150052.jpg

PA150051.jpg

Notice how the dog bone mounts hangover on the SE's

thats what the OP's talking right?
 


Yep, that's exactly what I'm talking about.My old car was an SE that gave out on me, now I have a GT- both are 2003. The GT's previous owner and the dealer I bought it from 'lost' a few parts so I've been picking scraps. I thought the mounts on the SE looked better but wanted to be sure there wasn't a reason for the difference before I swapped them. Plus I just flipped the mounts on my GT :p
 


I'm more concerned with the fans at the moment, as the ones in my GT look funky and asymmetrical, while the SE fans are in good condition. However, I did notice some dents in the front of my GT's radiator fins, if it's too bad I might swap with the SE - that one is brand new.
 
I haven't messed with a 3100 gp in a while but you should just be able to use the fans off the 3800. The rad should be the same. How can you see the rad? The condenser is in front of the radiator.
 
You must log in or register to reply here.
Back
Top