• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Red 2006 Grand Prix GT Supercharged



Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Here found these...


6emuhuny.jpg


mavu8a6a.jpg


hy7e2yma.jpg
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Nice, I have taps. idk what size tapered bolts tho if you can remember. Or I'm creeping you're thread anyways, so hopefully you mentioned the size lol.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Or just do it the old fashion way with what you have available and use either a penny or dime and some rtv and call it a day and some block off plates
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

I don't think I mentioned the size... Those were plugs I had at work. I just picked a size that was close and tapped for that thread
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Ahh okay, and I'll just use dimes for the passages, idk what to use for the egr though..or do Pennys just work?
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Iirc when I used dimes on Anmars car we had to use a dremmel to make the dimes a touch smaller.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Did a little today, drilled and tapped for the pcv, jb welded with dimes and cleaned. Now just gotta paint it to clean it up a little. Also, drilled my bushings for my coilovers, now I just need some washers and one helper spring n I can assemble them until spring!

Sizes are 3/8ths ID to 1/4 OD brass hose barb straight, same size plastic 90* elbow, 2 small hose clamps, and I got 10 ft. of hose for $10. Hose is rated at 45 psi @70*F, so that should be okay, if not I'll be needing heater hose.
20140209_145013_zpsem1srkpw.jpg

hose barb in
20140209_143150_zpsonset2ui.jpg

Passages blocked
20140209_143448_zpsllsdccgd.jpg

Also got 2 new 35w trs DSP amp ballasts, 2 new 35w trs DSP d2 ballasts, and new waterproof hd 9006 relay from trs fo free!
20140209_143927_zpsnncgicxc.jpg
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

you also need to drill and tap the rear PCV port, and then do the same thing to the blower
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Got the 3.4 pulley setup today, and the wiz air intake. Also went and picked up some oil, air filter, n some copper gasket spray. I bought an aluminum rod too to make some egr block off plates, those will get done tomorrow.
Bunch of stickers too, woohoo, at least 10 hp there.
20140210_164415_zpsrog5u0dp.jpg

pretty mint wiz air
782c8d1587dd18e3e50ddfd6c3d9a1ee_zpsadbbd00d.jpg

c677f814da39ba85e375b16da591d5e3_zpsc4a66c2b.jpg
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Maybe this time you can beat Corey;) lmao good to see it coming together more bro!
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Haha yeah dude, I didn't have my 3.6 on then, but that was jank haha
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Now just in need of a retune. Is D.Smutts going to do it for you, or waiting for intense?
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Now just in need of a retune. Is D.Smutts going to do it for you, or waiting for intense?

I'm not sure yet, my buddy brian, whose helping me with the ic install, has hpt, so we may try something with that first. If it doesn't go well, I may wait for intense. But I'm nervous cuz mines an 06 n no one can tune them right it seems. I may need to do an overkill again. I'll have to wait and see.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Gotcha! Just was going to mention to not use the one michigan tuner if that's what you were thinking if you saw the post on fb haha! it was interesting, but he was the one who blew up anmars
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Haha no, I was actually gonna give him a shot but I doubt it. It's just gonna be harder for me to find someone. I asked Darryl and he recommended a guy, but that'll be 300 bucks. So we'll see which route I take.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC & Coilovers Coming Soon!

Yeah dont do it! Couldn't stand his ground and I have heard other cars blowing motors too from him. But hope it all works for you and its expensive. I am glad I cant mod right now but want to bad haha
 
Back
Top