Question for the PRJ wire users out there

[loudimpala]

Was your #4 wire really tight across the SC body, and almost the same length as the #2 wire? Mine is laying right up against the SC housing, and if it weren't for the wire seperators, it would be laying on the SC housing.

Loud

 

[dsmuts]

try running them under the snout.

 

[loudimpala]

Tried that. Because it's gotta come back up and over the bracket in the back, it's still too short.

Loud

 

[Fivefingerdeathpunch]

Whats wrong with them laying on it?

They wont burst into flames.

 

[BillBoost37]

Number 4 should be the longest wire. Pull them off...you should have one back one that is longer.

 

[Bio248]

yeah, it's in the wrong spot.

 

[blueguy]

LOL, plug brackets.

LOL@routingoverthesupercharger.

Remove that alternator bracket, that might help you too.

 

[BillBoost37]

Remove....c'mon. I leave that baby there.

 

[machinegunsquid]

Yeah, if it's that tight, then you might need to lay the back 3 out and check for the longest.

Under the snout is the only way to go.. Route them like this and win

 

[OH4CompG]

Back when I had prj wires the back three were all equal length. Same with the fronts. They must have changed things around a tad in the last 4 years