• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Power steering only works one direction?

dunnster76

New member
I'm unsure why or how to fix/what to fix. But my car has an issue with the power steering, it works fine when turning the wheel to the drivers side, but most of the time doesn't when turning towards the passenger side.

Any help with this?
 


That's my initial thought, I'm a little rusty with these cars though. So I'll ask a lot of questions for a while.

I was hoping I missed something, cause replacing the rack can get expensive.
 


its not the worst job to do. i wont lie, it kinda sucks if its your first time. theres a few good how tos out there. the only part i skipped in most of the how to's was not to remove the master cylinder to get to the power steering pump lines, they can be reached just fine from underneath the car.

all the write ups say its a 2 man job, i did mine solo, the only help i had was a friend to wiggle the steering wheel to get the steering shaft back on the new rack.

took 4 hours, from start to finish, like tools cleaned and put away done. so maybe 3 hrs of real work, a few breaks and such.

i also backed my car up on ramps, then jacked the front up and used jack stands under the front, this adds a bunch of room under the car.
 
Should be just the basics. Although IIRC, one (or both) of the lines at the rack require an 18mm wrench, which not everyone has.
 


Should be just the basics. Although IIRC, one (or both) of the lines at the rack require an 18mm wrench, which not everyone has.


yes, the lines are 18mm, a 3/4 with a dime taped to the inside of the wrench also works. thats how i got mine off. then i phoned a friend to drop off a 18 mm line wrench to get them back on nice and tight with. lol
 
Back
Top