• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

post up your audio equipment



New build for the 15'' SMD going on, peek,
577188_3006445732419_1600682969_3620410_1113992952_n.jpg


lil' re-build log SMD in a Grand Prix - SMD Forum
 
Everyone has really nice set-ups. Mine is more power than looks lol, I keep planning to clean it up. The wires under the car are now in heavy duty black conduit, not the crappy blue, and the are routed better.

I have 2 RE Audio XXX 12's
2 Hifonics 2600 Watt Amps
Panasonic DVD Head Unit
3 Car Audio Batteries
4 Runs of 0 guage wire ran under car
350 Amp Alternator
Big 3 done
Each amp had dual 0 guage inputs for positive and ground

REXXX019.jpg

REXXX021.jpg

REXXX024.jpg

REXXX026.jpg

REXXX028.jpg

REXXX030.jpg

REXXX032.jpg

REXXX034.jpg
 
Alpine cda-7892
fosgate fnx 4" mids
fosgate tweets
oz audio matrix xovers
Dianomd audio d391i 6x9s
Fi Q 18 D2 w/ BP (older model) 4.2 cuft sealed with polyfil
mmats dhcx2200.1
kicker zx350.4
yellow top

Nothing serious but gets plenty loud and sounds AWSOME!! :-)


Hoping the 18 breaks so i can have it reconed to a 15 and go ported!!! Haha. Funny thing is the sub gets hotter than the amp!!! Even on hot days.... God i love mmats!!
 
i have a sundown audio 15 v1 1500 rms and a rd audio 1750l.1 at .5 ohm putting out 2500 rms . front stage is 2 selenium 6 inch speakers 100 rms each pro audio speakers . yellow top in the front and group 31 yellow top in the trunk. car has big 3 and 0 guage thru out . no sound dedener yet . should do high 140s to low 50s
 


your not going to hit a 150, shouldn't with that set up (SA-15 or Z or NS) another side note, wired at .5 yes seeing .5 power no... i'm wired at 1 (.5 per amp) usually rise to 2.3-2.7
 
it can burp a 150 easy its been done thats what that woofer is for my box is tuned for spl but its good for both . im not going to burp but it will be high 40s forsure . and its one double the power but i have seen them take all the way up to a 10k burp they can take it likea champ !
 
Enuf trunk room left for my other MB Q 4.80, my MB Q 4.125, probably more batts and put the mid amp rack on top.

552315_3193292363468_1374074334_n.jpg
 


It's done, an "Ascendant Audio" SMD (with a fresh dual .7 recone done by Nick Morgan, that's his signature on it), on a SAZ3500D, yes it's running at .35 ohms!
not much rise with the double layered birch box reinforced with threaded rods, 45's in all the corners, adjustable frequency, from 40-29htz...

376377_3231809446371_1571988973_n.jpg
 
chrishova said:
It's done, an "Ascendant Audio" SMD (with a fresh dual .7 recone done by Nick Morgan, that's his signature on it), on a SAZ3500D, yes it's running at .35 ohms!
not much rise with the double layered birch box reinforced with threaded rods, 45's in all the corners, adjustable frequency, from 40-29htz...

376377_3231809446371_1571988973_n.jpg
Click to expand...

I'm getting another amp, the woofer can take the SAZ3500 @ .35 ohm, the Epic 160 and the HU all the way up, so this DDz2 amp was clamped at 7700w at 1.8 ohms..
557472_3314911963882_1350468910_n.jpg
 


1LoudGrandPrix said:
Get the NS.1 Chris, or get another 3500 and strap them
Click to expand...
I am getting this DDz2 for the low!!!! I will be trading again soon! The DDz2 did 7700w clamped at 1.8 ohms, so that's about right! I can run it at 1.4 ohms (I have a D.7) but I would like to try it at .35! Ty said it can do it if have the electrical! The DD will do 13,000w at 16v! I do like the NS-1! It will be about the same wattage. I don't wanna strap amps so I can change ohms quickly. Even though I've been at .35 ohms since the week after I put it in, lol
 
You must log in or register to reply here.
Back
Top