• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Pipe Degree for air ram intake?

99f338a6a87d7b1b79f5132e53d8f4ac.jpg


Sent from my SM-N910T using Tapatalk
 


Put some zip ties on it and spray it with carb cleaner for leaks...

If you still have leaks, you need some smaller I.D. tubing/vac line for both sections...

Where about in NOLA are you? I pass through there every so often for work (Baton Rouge)...
 
GoldGTP said:
Put some zip ties on it and spray it with carb cleaner for leaks...

If you still have leaks, you need some smaller I.D. tubing/vac line for both sections...

Where about in NOLA are you? I pass through there every so often for work (Baton Rouge)...
Click to expand...
I stay on the Westbank we should meet and you could help me out

Sent from my SM-N910T using Tapatalk
 


why in the hell are you looking at that? get the damn car scanned already, you have codes because your light dont work.......codes hold the key to your issue, but your wont get the damn thing scanned.
 
ScottyDoggs said:
why in the hell are you looking at that? get the damn car scanned already, you have codes because your light dont work.......codes hold the key to your issue, but your wont get the damn thing scanned.
Click to expand...
I can't get it scanned it's not drivable do you know where the speed sensors are on the transmission

Sent from my SM-N910T using Tapatalk
 
Jason97GrandprixGT said:
I can't get it scanned it's not drivable do you know where the speed sensors are on the transmission

Sent from my SM-N910T using Tapatalk
Click to expand...


your wasting your time, get it scanned one way or another. the beauty of obd2 is you get a fault code. 95% of the time you follow the code and its fixed. but your keep side stepping the most important part of any diagnosing. rule one, scan the car.
 


ScottyDoggs said:
your wasting your time, get it scanned one way or another. the beauty of obd2 is you get a fault code. 95% of the time you follow the code and its fixed. but your keep side stepping the most important part of any diagnosing. rule one, scan the car.
Click to expand...

^^^^^^^^^^^^


Sent from my iPhone using Tapatalk
 
I researched the symptoms of a bad vehicle speed sensor and it says speedometer needle not working and gear shifting problems and that's the problems that I'm having

Sent from my SM-N910T using Tapatalk
 
now google a maf issue and your'll see the same thing....like i said, wasting your time. if you want it fixed, get it scanned.
 
ScottyDoggs said:
now google a maf issue and your'll see the same thing....like i said, wasting your time. if you want it fixed, get it scanned.
Click to expand...
The vehicle speed sensor connector wires are bare and have nothing covering them some of the strands are cut also so I think that's why my car wasn't shifting gears. And would that cause it to shut down while I'm driving

Sent from my SM-N910T using Tapatalk
 
well any bare wires are sign of bad things. dont think its the cause of stalling tho. once again, get it scanned if you want to fix it.
 


clearly it needs to be pounded into his thick skull how to go about repairing things.


said it on all 4 pages of this thread, get it scanned, not only in this thread..... in about all the other 10 threads as well.
 
You must log in or register to reply here.
Back
Top